- All
- New
- Pre-Owned
5stars
17ratings4stars
2ratings3stars
1rating2stars
0rating1star
0rating
Would recommend100% agree
Good value100% agree
Good quality88% agree
12 Reviews
Good quality and worked as advertised in removing stuck plug parts.
Three of my 8 plugs separated (with parts stuck in the head) in two different ways. The Lisle kit worked exactly as advertised in removing the stuck plug parts.
Instructions were complete.
Kit 65700 was complete; no additional special tools were needed.
I never used E82 fuel (thought to be an aggravating factor in stuck plugs).
152K miles on factory plugs; engine was not missing but power increased noticeably with new plugs.
Copious quantities of carbon cutting spray was used on the 5 plugs removed without breaking (1/4-turn-spray/ another 1/4-turn-spray/ another 1/4-turn-spray/ and so on; may have helped??
After removing old plugs I removed spray solution from cylinders using compressed air; small air tube fished into plug hole for this blow out procedure.Read full review...
Verified purchase: Yes | Condition: new | Sold by: mobileoutlet1
Worked on one plug
I had 1 bad plug..porcelain puller worked great as did the pusher...the problem I ran into is with the extractor tool....after only one plug removed part of the threads broke off..was going to do them all but I'm afraid the tip of the tool will break off...but my truck is up and running really good...just wish I could've done them all...the tool is very simple to use and I had the plug out and replaced in about 10 minutes....would have given 5 stars if not for the extractor tool...Read full review...
Verified purchase: Yes | Condition: new | Sold by: tooltopia
An absolute must for Ford 3 valve engines!!!
I had 6 out of 8 spark plugs separate and stay in the cylinder head. Lisle Broken Plug Remover Kit (65700), was beyond awesome!!! It took about an hour for each plug to be removed, yet better than the alternative of removing the cylinder head. Make sure to use compressed air to blow away dirt before removing each spark plug, plenty of penetrating lubricant during removal, a vacuum with 3/8" plastic tube duct taped to an attachment (I was able to vacuum out each spark plug hole and get the tube into each cylinder to remove any debris that may have fallen into the cylinder. Proved invaluable as the last plug I removed lost part of the electrode ground metal into the cylinder and was able to hear the vacuum suck it out of the cylinder bore.), and plenty of patience!!! After the first plug removal, you get a feel for the tool and repeating the steps to remove the remaining plugs. Truck ran superb after changing the spark plugs and ignition coils. I had 100,000 on the first set. Don't try removing any Ford 3 valve engine spark plugs without this kit! Lisle 65700 Broken Plug Remover Kit is worth it's weight in gold ( or platinum in this case)!Read full review...
Verified purchase: Yes | Condition: pre-owned | Sold by: madcheetah
Amazing tool
This thing saved me thousands of dollars
I replaced the factory 2 piece plugs in my 07 expedition 5 of 8 broke and stuck in the heads
It was a lot of work to get them out but would have been impossible without this tool
Absolutely make sure you buy the American made version as the cheap Chinese version will break off in your heads and then you’re definitely in for an expensive mechanic visit
Read full review...
Verified purchase: Yes | Condition: pre-owned | Sold by: foruph
spark plug removal tool
I should've read the Ford TSP before I tried this tool. Had I done so, maybe I wouldn't have had to fish out broken porcelain, out of 5 of the cylinders in my engine. Still, the tool did remove all the spark plug bases.Read full review...
Verified purchase: Yes | Condition: new | Sold by: jb-tools
Making lemonade out of lemons !
This kit saved my a$$ I broke every single spark plug & was already expecting to have to do over haul on engine but this tool payed for itself right out the box removed all broken parts from heads in 2 hoursRead full review...
Verified purchase: Yes | Condition: new | Sold by: 6411l2001
Complete w/ porcelain extractor
Makes difficult job doable. All my broken plugs left porcelain attached:( . This kit did it all.!
Verified purchase: Yes | Condition: new | Sold by: tooltopia
Best in the market
This too is so easy to use, that it makes you feel like a bad ass when you complete the job.
Verified purchase: Yes | Condition: new | Sold by: speedysales715
Works as discribed - If you are replacing your Ford 3 valve spark plugs - you have this kit handy. Think of it as an insurance policy.
Verified purchase: Yes | Condition: new | Sold by: 6411l2001