5stars
10ratings4stars
2ratings3stars
0rating2stars
0rating1star
2ratings
Would recommend85% agree
Good value76% agree
Good quality91% agree
13 Reviews
Worked very well !! I was very skeptical at first, but the product was well worth the money spent !!! Very, very satisfied !
Be very careful if head has been machined ! Bolts may be too long, and may require length adjustment. Also recommend cutting gash in old head bolt and using it as a thread chaser, before installing new bolts.Read full review...
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
Great product
I have a 02 camry 2.4 and the head bolts pulled out of the cylinder block creating a coolant leak . I looked at all my possibilities and it was going to be a 1,000 to 2,000 for me to replace the engine . I found these bolts that required no drilling or putting threaded sleeves in and I got them . I tore down the engine replaced head gasket and had head checked . I installed head and new bolts , they torqued down . Put the engine back together and a week later the engine is running strong . I'm a 20 year technician and I'd stand by this fix . It works and will save you a lot of money . I fixed the engine with myself doing the repair for 350.00 . Definitely best shot at fixing your problem .Read full review...
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
An excellent alternative to installing g a $450 helicoil kit and save a ton in the labor!!!
Worked great for me, just be careful when torqueing down the new studs. I would recommend you skip the last step the book asks of you. (180 degree turn on all studs after torque specs are made.) Just rotate 90 degrees!Read full review...
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
Head bolts worked very well
Head bolts worked awesome they torqued perfectly to 25 foot pounds. We clean the block threads out with a nice brush from Harbor Freight they got down in the thread area and then we use some Summit Racing threading compound and they tighten up very nicelyRead full review...
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
These work
These bolts worked great for my block the threads were messed up and these bolts are longer to reach further in the block ti new threads about 1/2 inch longer so a really good solution to the stripped out thread problem Read full review...
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
great value and worked well
These prevented me from replacing the engine in this 06 Toyota camry, when a couple off the engine bolt would not hold
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
Great solution
Works, and is a lot easier and cheaper than helicoils. Will be using these when I run into it again. The Camry is back up and running with no issues.
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
Works good
Worked great for our needs. Feel like they are a little overpriced.
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
Large bolts. It did it was designed for using on a cyclinder heads.
There great!
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto
Bolts were half an inch longer than originals.
The bolts are too long, the technician refused to use them, he said if he forced them they would break the block.
Verified purchase: Yes | Condition: pre-owned | Sold by: ftwashauto