kmr_computers on eBay

About

Location: United StatesMember since: Mar 28, 2000

Feedback ratings

Last 12 months

Positive27- positive feedback in last 12 months

Neutral0- neutral feedback in last 12 months

Negative0- negative feedback in last 12 months

All feedback (2,413)

jerseycommissioner (107300)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
neo-tech2015 (64211)- Feedback left by buyer.
Past month
Verified purchase
Quick response and fast payment. Perfect! THANKS!!
jsfarmandh (66)- Feedback left by buyer.
Past month
Verified purchase
Thank you for a smooth and positive transaction.
flavorguy (5101)- Feedback left by buyer.
Past month
Verified purchase
»-(¯`v´¯)-»AWESOME eBayer»-(¯`v´¯)-»COME BACK ANYTIME»-(¯`v´¯)-»
priority_tire (484077)- Feedback left by buyer.
Past 6 months
Verified purchase
★★★★★Excellent e-BAYer★★★★★Highly Recommend★★★★★
smallenginesforless (47049)- Feedback left by buyer.
Past 6 months
Verified purchase
Outstanding! Thank You For Your Business With SmallEnginesForLess!

See all feedback

Reviews (2)

Ryobi Gas Chainsaw Reconditioned 14 in. 37cc 2-Cycle Automatic Oiler Cut Trees

Jan 21, 2019

Surprisingly great but....

Saw arrived in a box. Literally thrown in a box with a chain a bar and the power head. All three had smashed around in transit. No a deal breaker but not awesome. I go to put the saw together and notice the saw is full of saw dust and oil soaked pulp. "Referbished " may be a bit of a stretch. No the less for the price I moved on. Got the saw together and filled with bar oil and fuel. Tried for about 20 mins on a 50deg day to get it started. No go. I dig in to it and there is spark and I have fuel on the plug. Check for compression. We have compression. After another 10 mins or so I set the carb to the standard 1 1/4 turn out car settings. To my surprise the slow jet was almost 4 turns out. Once I did that it fired right up. After it warmed up I set the carb to my liking and now it starts 2nd or 3rd pull cold or first pull warm. It also cuts darn good. To test it out I turned a 10 and 8 inch diameter tree into firewood. No issues. Runs like a champ and doesn't big or run out of power. Don't get me wrong it's not a 60cc plus saw but for most this will get the job done. This would be a 5 star review if it showed up running and with a proper amount of packing material. Fyi to tune this you will need the pacman carb but driver.

JEGS Performance Products 81541 MIG/MMA 180 Welder 220V AC

Jan 04, 2020

Best small frame welder on the market to weld sheetmetal to 3/8 well for less than most 110 units.

This is the best mig welder you can buy in this price range hands down! Do note it is 220v only, no 110v option, but this thing runs smooth and produces high quality welds from sheet metal up to about 3/8's. the consumables are easy to come by which is handy. you can even get a spool gun for this thing to weld aluminum, or switch over and stick weld with it right out of the box. the duty cycle also seems to be better than rated. I have a bit of a habit of cooking welders as I am generally welding large areas of thick material, but this little thing just did not care. which is great in a small unit like this. I have some things I take issue with however. I had issues with the gun, and ripped the o ring gas seal when putting it together. they rubber seems to be garbage, even with a bit of grease on the seal it ripped like nothing. also the door to access the spool is held on with plastic hinges and didn't line up at all out of the box. lastly the thing i disliked the most was the 1ft long ground made of what is more like speaker wire than ground cable. It is enough to work but upgrading to a 25ft long 4 awg ground wire makes me mush happier. Save your self some time and money, don't buy a 110v unit when you can get this for less. Just buy this first, you can turn a powerful welder down, you can't turn an under powered welder up.

1 of 1 found this helpful

See all reviews