About
Reviews (22)
Aug 08, 2017
Not a good product.
I bought six of these and checked the continuity on each and to insure there were no shorted ones as previously mentioned in another review. I found one of the six to have no center pin continuity, male to female side. I cut it open to see why and was amazed at the way it was built. The center pin just contacts the other center pin with no solder to maintain a mechanical bond between the two. I took the other five and cut the knurled nut off and will use them as caps for SO-239's. I don't know how other right-angle connectors are made, perhaps they're made the same way, but these looked as though they could easily fail. Picture the male pin backing out just enough to break contact with the other pin and the connector is useless.
May 29, 2018
Well made
I really like the fact that the OD is larger in the middle where it passes thru the material I am mounting these to.
Feb 13, 2018
Great coax
Good coax to use for QRP feed lines, jumpers, etc. I use both BNC and SMA adapters with this and it works very well.