victoskit-0 on eBay

About

Location: United StatesMember since: Dec 15, 2017

Feedback ratings

Last 12 months

Positive0- positive feedback in last 12 months

Neutral0- neutral feedback in last 12 months

Negative0- negative feedback in last 12 months

All feedback (15)

buzzbuyzz (2604)- Feedback left by buyer.
More than a year ago
Verified purchase
Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.

See all feedback

Reviews (2)

Peplink Balance One 600Mbps Dual WAN Router Dual-Band 11ac Wi-Fi BPL-ONE

Mar 06, 2018

Make sure to upgrade your firmware.

Depending on the firmware your unit came with, you will need to upgrade the firmware for the unit to function properly. This is addressed by an a posting by a member of the Peplink Team on the Peplink forum. Google "Balance One Boot Up Issues". It says: A certain batch of Balance One / Balance One Core devices have been experiencing issues such as: Not being able to boot up. Occasionally rebooting after a short period of operation. This is happening because of timing issues with the RAM in the affected devices. This issue affects devices with serial numbers in the following ranges: 192C-25BC-D1XX to 192C-29A3-CCXX 192C-29AF-CCXX to 192C-29EF-88XX . . . If you are having problems flashing the firmware (as it goes off-line before before you have a chance) we have found the following procedure successful in upgrading the unit:- 1. Download v6.3.2s001 2. Disconnect all leads from unit with the exception of single LAN connection 3. Disconnect power from unit for a minimum of 1 hour 4. From your PC, run a constant ping to the device, e.g. ping -t 192.168.1.1 (Replace 192.168.1.1 with your Peplink’s IP address) 5. Power up device and monitor ping command 6. Once you see a reply, immediately log onto unit and upload firmware v6.3.2s001 to device: System / Firmware / Manual Firmware Upgrade / Browse 7. If the unit does not sucessfully upgrade, increase “Power Off” time in Step 3, e.g. overnight and repeat process from Step 3. We have successfully upgrade multiple units using the steps above, all of which haven’t missed a beat since.

1 of 1 found this helpful

HP JetDirect 500X External Desktop Print Server J3265A/ J3265-61002 (K351691)

Mar 14, 2018

Print Server performs

The JetDirect has been around awhile and is a good way to connect a legacy HP printer (with a parallel port) to a home network using a RJ45 (ethernet) connection. There is no software to configure the JetDirect. Typically no configuration is required (manual available on HP web site). Instead it has an embedded web interface. This interface does not work with today's browsers without significant reconfiguring (the embedded java used is blocked due to security cobcerns). Access however is available using telnet, and is very simple. Please see the manual.

See all reviews