About
All feedback (257)
- ancel-tool (20009)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- bellsbikeshop (148591)- Feedback left by buyer.Past 6 monthsVerified purchaseThanks for your purchase from the staff at BELL'S BIKE SHOP! Time to RIDE!
- d-spec1 (4629)- Feedback left by buyer.Past yearVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- autopartsclub2018 (51301)- Feedback left by buyer.Past yearVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- christianbookbag (85871)- Feedback left by buyer.Past yearVerified purchaseBuyers like you are a great help to us. Thanks!
- shoreretro (1045)- Feedback left by buyer.Past yearVerified purchaseGreat Buyer, Prompt Payment, Valued Customer, Highly Recommended A++
Reviews (6)

May 18, 2021
Don’t hesitate to purchase if this is the only replacement tires you can find
1 of 1 found this helpful This is the only replacement tires I could find for my bandsaw model. I ordered them out of necessity. I was delighted with the ease of installation and the saw is tracking true. The durability of the tires is still unknown due to limited time of use. The hardest part of the job was cleaning the aluminum wheels. The grooves on each side must be clean because the tire edges squeeze into them. Some reviews say the blade tracking is off, but if fully pressed into the edge grooves they track true.

Dec 14, 2017
Silky smooth and quiet
1 of 1 found this helpful I bought this chain to replace a worn out KMC chain, so I already knew the quality. This chain is smooth and quiet. I also use a Shimano HG-901 on the same bike. Swapping the two chains when cleaning and lubricating allows me to clean both chains at the same time. I find the KMC X11SL equal to, but lighter than Dura Ace.

Dec 27, 2017
Shimano Dura Ace shifter name plate
Easily replaces damaged name plate, and of original quality. Don’t pay a bike shop to install. Loosen brake cable, squeeze brake lever to expose the screws, and remove two Philips head screws. Slide name plate off. Reverse procedure to re-install.
