About
All feedback (1,490)
- e-specialized (7605)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- star-autostore (1512)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- jetmax (1871)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- bold_auto_parts (38377)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- second.sale (4121195)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (15)
Oct 28, 2024
This is exactly what I was needing and b...
This is exactly what I was needing and been looking for! Tried others and they stick out way too far or too sharp of edges, This is perfect
Jun 22, 2017
01 TT fwd
Item arrived and paint match was close to the factory color. Clear coat was good and could use more wet sanding. I installed it with double sided tape all around the mounting area perimeter. Then applied liquid nails toward the center on the ends wheee the double sided tape left a space. Just enough so that when pressed on to the oem spoiler, the glue had room to slightly spread itself into the area where there was no tape. Then once it was pressed on I used the masking take to tape all sides to hold it in place for several hours. Hopefully this will hold with the liquid nails and double sided tape. Looks aggressive but not an eye sore. Couldn't ask for a better deal paint and fitment. A for overall experience.
Feb 02, 2018
Looks nice but needs modifications
Like the title says, the seats look great and good craftsmanship but they are not the correct height for the main cushion section where you sit. The rails supplied dont work with the sliders. I had to get a different set of sliders. This was tested on 91 240sx. The main cushion is way too thick and should be only half of what it is in height wise. As of now, my head is about 2.5 inches from the roof/ headliner... this can be very serious in roll over or accident that can force the drivers head through the headliner. I would say they are better than stock only if they were thinner in the area where you sit. Would I recommend these? Yea if you want them in a truck... but for a car, specs are not right at all.
* for this to work*
I needed 8 additional nuts and sized washers to connect them properly to the bracket. I had to undo the seat main cushion claw rings that hold the main cushion cover from the underside front. Then tear out the middle cover claw rings and slide the cushion out through the front, lifting the cushion pad rear lip. Measured from the top of the pad 1.5 inches at the front and tapering to 1 inch to the rear. I used a sharp blade and cut straight to 90 degrees across as possible. Reverse install and it worked! I now sit only slightly higher than stock due to the sliders. But its within spec now. Shifting and pedal reach is good now. Definitely better holding than stock. If this was all done at the get go from seller, it would be 5 stars and better deal than sparco.