About
All feedback (133)
- buildingsupplies247 (4638)- Feedback left by buyer.Past monthVerified purchaseGreat communication. A pleasure to do business with.
- kitchen29 (57926)- Feedback left by buyer.Past 6 monthsVerified purchaseTOP EBAYER THANX FOR YOUR VALUED BUISNESS
- *frequency* (1613)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat buyer 100% recommended thanks
- *****- Feedback left by buyer.Past yearVerified purchaseHope to deal with you again. Thank you.
- *****- Feedback left by buyer.Past yearVerified purchasethank you for an easy,pleasant transaction.excellent buyer.A++++++
- tayna-batteries (427538)- Feedback left by buyer.Past yearVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (6)
Apr 22, 2020
Creda main oven door handle
Genuine Creda part, fitted perfectly, replaced previous cracked handle, same colour - white as original. A tad expensive but it is the real bespoke item for this oven. Requires removing the glass by unscrewing and separating from door frame. Easier by taking complete door off oven at hinges. 30 min job.
Jan 12, 2019
Great, does the job as intended, but you need to strip out whole door and wiring to fit this, so effort required.
I have now fitted these kits to both OSF and NSF window winder mechanisms to my 2001 Fabia 6Y2 hatchback over the last year and the kits for both arrived promptly in a packet, small enough to come through letterbox. Biggest effort was removing door panel and all associated wiring to get at window winder carrier panel and the offending scrunched lift cables. Take it steady and give yourself space to extract the metal carrier panel from car and place flat on a work surface and you can then proceed to swap over the broken parts for the good parts in this kit. Each failure occasion has been caused by a snapped white nylon slider which releases the cable tension and then mashes up the steel cable in the motor spool housing. This kit contains all the 3 cable sections and a new spool and nylon sliders/ clamps to enable the complete repair of the window winder action. The original window lift motor and gearwheel must be operative as this replacement cable spool simply engages over motor drive gear just like the old one. Took me probably 4 hours to remove and replace the door regulator mechanism, an hour to remove carrier panel, an hour to swap cables, sliders and spool and 2 hours of cursing to get it all back together trying not to snap the central locking popper that comes out of the top of door plastic. I still broke it. Lots of sharp metal edges and tricky wires to not trap. But for a competent and methodical DIYer with small hands it is not a problem. Keep supplied spool tiewrap and tension spring lock in place on new cable spool until the last moment of fitting in place over motor gear. Google has workshop manual pdf's to show where fixings for door panels and glass clamps are hiding. Quality of parts is same as original. use silicon grease or spray to lubricate runners before refitting but runners do seem to be happy with nylon sliders without. Enjoy !! Main dealer cost ? £££££. £80.00 per hour labour plus parts as an example. Main dealer would replace whole carrier panel instead.
Sep 02, 2020
Like for like replacement. Inexpensive. Perfect, clean.
Not fitted yet, held in reserve. As removing Diverter valve caused gauge connection of copper umbilical onto Diverter to twist when detaching. Bought in case Diverter gives trouble again and have to detach existing gauge from it but it breaks.