About
All feedback (239)
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.Past monthVerified purchaseGreat communication. A pleasure to do business with.
- k***p (102)- Feedback left by buyer.More than a year agoVerified purchaseFast shipping, good communication, product as described.
- t***t (384)- Feedback left by buyer.More than a year agoVerified purchaseItem as described .Thanks for shipping quickly and packing it well.
- truckandindustrialfilters (25454)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended!
- rolling-cycle (45286)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (5)
Sep 28, 2020
Solid, reliable HK quality
HK sells quality, tested batts. Cells are balanced and discharge evenly, capacity is always at least what is stated on the label. Too bad they discontinued this one. Glad they can still be found.
Using this in an old Turnigy 9X transmitter. The servo type lead works to connect it, you don't need to add a 2S balance plug to use it. Center pin on the transmitter is positive (red), either of the outer two are negative, they're internally connected.
Aug 23, 2021
OEM DT Swiss 11 speed aluminum hub driver for SRAM/ Shimano HG cassettes. Fits most DT Swiss hubs.
Appears to be OEM DT Swiss 11 speed freehub driver. I have a pretty old set of Bontrager wheels, ca. 2002 or so, Race X Lite. Top of the line back then, Lance won a few tours on them. Obviously back then there was barely 10 speed, definitely no 11 speed so the driver hub is too narrow for an 11 speed cassette. Those are still outstanding wheels (They have DT Swiss hubs on them with the Bontrager logo), light, stiff, strong, aero bladed spokes, etc, and I dusted them off for an 11 speed SRAM Red eTap build. Needed the new driver hub to be able to use 11 speed, this fit the bill. Fit perfectly, included the quick release end cap. Standard, high quality bearings inside, precision construction. Identical to the one it replaced, just a little wider. This is the aluminum version, they have a steel one as well. Aluminum is far lighter but not nearly as durable. The steel one weighs a ton but will last forever. I'd use the steel one on a mountain or gravel bike that I was going to abuse but for weight weenie road, aluminum is the way to go.
Jul 26, 2019
Great quality for the price, recommended for a hobbiest with a few hives.
2 of 2 found this helpful Box that it was packed in was sturdy but it was loose in that box and flopping around, the small amount of styrofoam it was packed in was broken in small pieces, unit arrived OK though, a few small dents. Assembly and operation are simple and intuitive. Stainless tank and frame rack inside are solid quality, no complaints. The motor will spin the frames at full speed without laboring but it gets really hot, overall worked well. Legs should be bolted to the floor or a piece of plywood, they're not strong enough to not be joined somehow, just u-shaped stainless sheet metal. Tack welds hold it together, will they last? Pay close attention to balancing the frames inside or it'll be jumping around. Good quality nylon honey gate included but I don't use it- strainer and bucket under the hole is fine.
As you do with any made in China machinery, check every bolt, nut, part etc to be sure it's correct, properly tightened, aligned, etc. Give it a good wash. The 4 bolts attaching the motor/ drive assembly to the frame were the wrong type of bolt and were loose. Had to replace, add washers etc. Plexi lids were not hinged on as pictured in the listing but rather just sit on top. That's actually better, they'd be in the way if they were bolted on.
End of the day, it spun all of the honey out of my frames as expected. Got just under 3 gallons from a medium super.
Recommended for a hobbiest with a few hives.