About
All feedback (210)
- cashtro_001 (24902)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- cldepot (268000)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- dapetz (415512)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- qimpservices (46016)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- bloodsweatskillsltd (90)- Feedback left by buyer.Past monthVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- ef-trading26 (4904)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (5)
May 30, 2018
Good introduction to computing
Well made and cheap. All you need to get started can be found on the companion website. Easy to use to take the first steps to learning about computers. Suitable for ages 8 upwards.
Mar 18, 2021
Looks good
Just what I needed for craft work
May 12, 2017
Useful bench, good value
1 of 1 found this helpful The bench arrived as a flat-pack. If you have trouble putting together Ikea flat-packs, then you will have trouble with this. However, if you're reasonably handy, it should be fairly straightforward.
It took me about 2 1/2 hours to assemble.
You will need an electric screw-driver and an electric drill. There are qute a lot of screws holding the bench together, so I found the electric screwdriver very useful.
Allthough there are some pilot holes pre-drilled, to show where the screws should go, not every screw location had a pilot hole. I would recommend drilling pilot holes, to avoid splitting the wood. I used a 3mm drill.
I also found that some of the pilot holes didn't line up with the holes in the piece to be joined, but that was easy to fix with a bit of commonsense. It helped to fix the bench together roughly with minimum screws, to get a sense of how it all fitted together.
Now it's up, I am well pleased with it.