About
All feedback (30)
- karlat25 (6407)- Feedback left by buyer.More than a year agoVerified purchaseValued customer, Thanks for an easy, pleasant transaction. Excellent buyer.A++十+
- tokyowing (13090)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- shining-auto (13932)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
- *****- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
- wsa-auto (35677)- Feedback left by buyer.More than a year agoVerified purchaseThank you for the business, please visit us at wsa-auto for more parts.
- cawoodhondamarketplace (2261)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
Reviews (4)
Sep 29, 2021
Buy these and save your strength for something else!
A must have product if you ever plan to take your doors off, or more accurately put them back on. Takes all the pain (literally) out of aligning both hinges so you can seat the door. Just do not use two (2) per door or your right back to where you started with equal length hinge pins. Just thread one (1) to the Top Hinge pin. Then re-install the door, start by placing the top pin slightly in the body hinge and you can easily align the bottom pin without concern to the top hinge alignment anymore. Once in place remove the extension, reinstall the hinge caps, and repeat for next door.
Nov 16, 2021
Nice, but maybe not for you….
Looks and Feels like a good product. However, if you have aftermarket LED headlights, they (most likely) won’t fit. The Euro bars will hit the lens long before you can seat the ring. If you have the stock lights laying around, check the lens on your LED vs the Stock Halogen. If they are identical in side profile you might be ok. Mine (and three others with different brands of lights) bulge out a bit vs stock. Even with longer screws to mount them, your using the ends of Euro bars to hold the lights in place. 4 small footprint points of metal clamped to each lens…. Consider how a escape tempered glass breaker works.. you lights will be in a similar situation and at risk of being destroyed… just scratched and cracked vs shattered like glass would.
Nov 24, 2021
Nice but doesn’t fit my aftermarket lights.
First the good, their nice and are well made. A little more substantial than others. If they fit, then I’d recommended them.
That leads right into the bad… advertised as fits stock and aftermarket, they don’t fit all aftermarket. They don’t fit the Xsprite Invision 7in LED headlights. Just like all the others the bars will not clear the lens of the bulb. So for now, their being held in place via the bars, not my preferred means at all. For now I’m gonna get some longer screw and stick on pads, maybe silicon dots to at least remove the metal on plastic contact. Then next spring work my neighbor on developing a spacer that will move them and hold the light in the right way (with the ring). These were so close, but the Euro bars need to start their arc a bit later to fit properly without risking damage to the lens.