About
All feedback (396)
- maxef-sales (1615)- Feedback left by buyer.Past monthVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- z-stone (4257)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- lakemichigancomputers (32973)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- jbrake777 (433)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat Buyer
- swellcells (12452)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- pcjockey-is-a2j (318)- Feedback left by buyer.Past 6 monthsVerified purchaseFast payer. Great communication.
Reviews (10)

Nov 07, 2017
Almost perfect
Put this carb on my old Troy-bilt Horse roto-tiller with Tecumseh engine. Not sure of the engine size. I do know that all the holes on the carb throttle were on the wrong side, so I had to drill a small hole to put the throttle rod on the correct side (otherwise the throttle lever would not open the throttle plate). Luckily, the metal was easy enough to drill.
The carb adjusted fine and I was able to get the machine to idle for the first time ever (I bought it used). Worked great until it got really warm then the combination of heat and vibration caused the carb to flood. Easy enough to take off the bottom bowl and bend the float tang a little bit to drop the fuel level in the bowl.

May 15, 2019
Works fine - save money
Drop-in replacement for the same modem that Optimum provided. Just need to call Optimum Tech Support, tell them you have your own modem, give them the MAC number off the label, and then return the old modem to save $10/month rental fee.

May 29, 2018
Hardware good but instructions for software lacking
1 of 1 found this helpful First let me say that the product works fine - after you get the software to work. In my case, the Honda software did not recognize the HIM device at all and I had to figure out a registry change to make it work. This was not documented anywhere, not even out of the internet.