About
All feedback (29)
- *****- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (2)
Jun 12, 2018
CARQUEST 30240 90 DEGREE GREASE GUN COUPLER
I bought this to grease tight spots on a 1999 Silverado. The tension on the tip of the fitting is so tight that I cannot seat it on the grease nipple. I can get it to seat if I put the nipple in the vise and whack it with a hammer, then, to get it off I used 2 screw drivers to pry it off. Not very useful for a tight spot under the vehicle.
Totally useless Replaced it with a Lincoln Industrial Coupler 5883
Oct 16, 2019
A little machinist work to do before you can put it on.
I was displeased when I first tried to mount on my B&S 15T212 0160-F8 engine.
I could not put in on because the welded flange had not been ground to allow the muffler to get past the valve cover. (See picture 1) Once I ground enough metal off to get past the valve cover, the muffler would not sit flush on the exhaust port. The pipe protruding into the exhaust was too long. It also was not cut straight. I took off about 1.5mm of metal to allow the unit to sit flush on the exhaust port. After that it was a piece of cake.
Included two pictures of what the old OEM flange looked like.
I rated "not good: value because of the cost and the work done to get to fit.