About
All feedback (1,980)
- ecwstore (13855)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- miniduino (354125)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- elon_wholesale (3630)- Feedback left by buyer.More than a year agoVerified purchaseA+ Great buyer, prompt payment! Any store would be lucky to have this customer!
- depotlocker (234)- Feedback left by buyer.Past monthVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- valsman4ever (10098)- Feedback left by buyer.Past monthVerified purchaseWe value our customers. Thank you for doing business with us.
- cookiecuttershop (36070)- Feedback left by buyer.Past monthVerified purchase♥ ♥ ♥ Wonderful Transaction! ♥ ♥ ♥ Thank you! ♥ ♥ ♥
Reviews (13)
Apr 06, 2017
Great bulb! White Color not as perfect as a Philips, but very close.
These are very good bulbs at the best price around that I could find. However, the colors emitted are not absolutely perfect as a philips bulb would be, just close. Like one Amazon reviewer said, about this Tourchstar brand, great for a guest bathroom, or any bathroom, you do not need for the exact and perfect color of your cloths (he used a spectrophotometer, if I am remembering correctly, because he had one and was in a business that needed one).
Aug 26, 2017
If you need a 60W equivalent bulb get this one!
I love these flat bulbs from Philips. They light all the way around evenly. They are the same brightness as a 60W incandesent, yet they use less than 10.5W. I measured with my clamp amp meter and it actually comes in around 6W!
Also these bulbs are unbreakable. They are advertised to last over 20 years.
SlimStyle LED bulbs from Philips are my absolute favorite.
May 04, 2019
Great Laser, but adjusting the disk angle may be the only thing wrong with your 360!
If your laser is burning out, then you should get this product, because it works and is not expensive ($6). It is more expensive on Amazon.
It is difficult to get to it and install carefully.
My Xbox Slim's problem was that the two adjusting screws, going to the tray/disk holder, that align it to the angle of the laser, got 1/2 a turn tighter over time (and travel). I had to find those two screws that adjust the angle the disk is held at and turn those two screws counter clockwise 1/2 turn. The screws have springs underneath them so that helps distinguish them, and there is a third screw between them that is just supposed to be screwed down (no spring on that one). The symptoms were poor reading of the disk, no disk error, and unreadable disk, clean disk... ...basically everything making you think the laser was burning out, but it was just disk/tray alignment issue. I thought I had better post because this must be a very, very common problem, and it might save you $6 from buying this product when you do not really need it. If you want to know where about those two screws should be, once screwed all the way down, they should be 1+1/4 turns loosened (about). Just do not put everything back together, so you can make 1/2 turn adjustments, until it works, and I will bet that is all you need.
Another trick I learned on youtube is that if your laser really is burning out, you can increase the intensity (to make it work again for a while) by adjusting the outer philips head pot (potentiometer) on the laser circuit board. Didn't have to do that myself, but for more details on that, you can check youtube.
Hope this helps people. :)