About
All feedback (282)
- autopartsprodigy (5836)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again - Enjoy your Parts From Auto Parts Prodigy
- americanmantle2010 (5127)- Feedback left by buyer.Past 6 monthsVerified purchaseThanks! Hope to receive feedback on the quality of our products.
- safetobid (5158)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- lehmans (13216)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- elitetreasure- Feedback left by buyer.Past yearVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- aryeh-61 (805)- Feedback left by buyer.Past yearVerified purchaseGreat communication. A pleasure to do business with.
Reviews (6)
Jul 11, 2017
Using These Bearings To Rebuild Our Inpact Sprinklers
I have been using these bearings to rebuild our irrigation system impact sprinklers for several years now.
I bought used wheel lines and they all have the sprinklers reefed down so tight, the sprinklers are almost impossible to remove. I had to develop a process to rebuild our sprinklers. At first, I virtually had to let the sprinkler wear through the bearing assembly to total failure. I now remove the leveler and the sprinkler as a unit and use a band saw to cut the bearing assembly off. I use a pipe wrench to remove the tube from the upper part of the sprinkler and an impact wrench to remove the sprinkler base from the leveler. I then replace the bearing assembly with the parts I get from Sprinkler Innovations. If the leveler needs rebuilding, I use parts I get from Sprinkler Innovations to do that also.
I have yet to have a failure of these bearing assemblies after 5 years of using them. These are high quality parts and they are reasonably priced. Using my process and these parts, it takes about 10 minutes to replace the bearing assembly and about 5 minutes to rebuild the leveler. I replace them on the wheel lines as a unit and it takes less than 5 minutes. I might add that the sprinklers I'm rebuilding are probably more than 20 years old. They were well made and access to these parts help me keep them going at a reasonable cost.
Dec 02, 2019
Our Ranch Dog's coat looks slick!
Really works! This is a well made product.
Feb 20, 2017
Used this to calbibrate my reloading scale
1 of 1 found this helpful I used this weight set to calibrate my reloading scale. It turned out that, to within 0.1 grains, the scale was spot on.