About
All feedback (25)
- tomoniko (893)- Feedback left by buyer.More than a year agoVerified purchaseImmediate payment received, excellent transaction, thank you!!!
- fsasllc (223522)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- mountainridgetrading (4574)- Feedback left by buyer.More than a year agoVerified purchaseGreat transaction! Thank you for your business!!
- benchweld (248)- Feedback left by buyer.More than a year agoVerified purchaseA++ Buyer! Thank you!
- jlfastenersab (128)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
Reviews (6)
Jun 01, 2021
HEAVY Industrial Precision Ar/He 355 Series Flowmeter/Regulator w/ Quality Hose Made in USA
This is the largest, most heavy duty, reliable flowmeter regulator I've ever seen. It's very robust, the brass has a great, smooth finish, and there's a lot of it to love. This is a shining example of what a true industrial US made precision flowmeter should look like. I leak checked every connection, nothing leaks. The flow adjustment knob is very easy to dial in very precisely. The dual scale is the largest I've seen, so the resolution of the flow rate increments is exceptionally fine, which is a primary concern for TIG welding and/or purging. The included gas hose is also of excellent quality. The reg/flowmeter includes a 7 YEAR WARRANTY! That's absolutely unheard of today. I HIGHLY recommend this unit over any other.
Feb 21, 2021
Best Quality Saw!
I bought the 14” Fein Slugger Dry Cut Metal Saw over 6 months ago. I bought this saw for my own shop at home, but I use an Evolution 14” saw at work. The Evolution is still 1000X better than any abrasive saw, but the Slugger blows it way out of the water! There is really no comparison between them. The Evolution’s base is about as flat as a pretzel, it’s stamped, thin sheet steel with waves, peaks, low-points, and a super rough surface. You can’t even put a square up the front edge to true the fence angle up to the blade. The angle gauge is completely useless and inaccurate, so if you need any amount of precision, you’ll have to dial it in every time through trial and error. Basically it’s a guessing game with the Evo. Beyond that, the work holding mechanism is not very rigid for several reasons. The first, most obvious one is just that the entire base is a flimsy, pretzeled up piece of sheet steel. Second, the vibration of the saw and workpiece aren’t too bad, but there’s way more vibration and blade deflection & walking than the Slugger. The third only applies when trying to make a miter cut, as the movable jaw can’t provide sufficient surface area or the proper balance of clamping forces to support the workpiece at any angle other than 90°, so the workpiece moves, causing the angle to come out wrong every time. The Evolution blades cut much slower than the Slugger blades, they vibrate, walk, deflect, and don’t maintain smooth cutting action like the Slugger blades do. The Slugger is a beast, weighing over 60lbs. The base is very flat and has a super smooth surface finish, as do the vise jaws. The base is somewhere around 1 inch thick and is a solid casting, most likely machined from MIC-6 or some similar cast tool & jig plate alloy. The cutting action is very quiet, extremely fast and smooth. You can’t feel the teeth of the blade contacting the work, it’s just a swift glide through the material every time. It’s very consistent, precise, and leaves a much better finish without burrs relative to the Evo or any other metal cutting method/machine except for maybe a good milling machine! The Slugger is just a beautiful machine in every way. It’s solid, it was very obviously made with great precision and attention to quality and detail. If you’re someone who appreciates, and values precision, quality, accuracy, repeatability, efficiency, and craftsmanship, then this is THE machine for you. It is absolutely worth every penny to have such a well built saw that you can rely on to produce high quality results every time and will hold up to industrial use for years to come. For me, it’s also really nice that I can make cuts without generating a lot of noise, and without any dust or sparks, or surface contaminants. If you need a great saw, you will never regret investing in the Slugger.
Mar 23, 2021
The only winkelshleifer with PERFECT balance, NO vibration, and monster torque!
When I unboxed this Metabo WEPBA 17-125 QUICK DS, I was very highly impressed by the build quality and the robustness. The Auto-Balancer thing is not a marketing deal, it is seriously the best thing that’s ever happened to a power tool (and to my hands & arms). This is the only grinder that I can work with all day w/o aggravating my carpal tunnel. I also get a much better finish and my abrasives last more than twice as long with this tool. I’ve used a lot of different grinders, I have 3 other grinders, a DeWalt corded brushless 5/6in 13A (it lasted a couple months and won’t start, it wasn’t great when it did work), a corded DeWalt corded 4.5” 11A, and a “Metabo” corded 4,5” 11A (Not a German made model lol it doesn’t look or feel anything like the WEPBA 17-125 quick, even the handle is totally different). I’ve used really junky grinders, and I use a Metabo WE 15-150 6in at work, but nothing comes close to this one. It’s worth every penny and more to have a really great tool that’s comfortable and easy to work with, gets the most out of any abrasive, and is super productive.