lewtwo on eBay

About

Location: United StatesMember since: Jan 08, 2000

Feedback ratings

Last 12 months

Positive4- positive feedback in last 12 months

Neutral0- neutral feedback in last 12 months

Negative0- negative feedback in last 12 months

All feedback (1,660)

oksurplusoutlet (13279)- Feedback left by buyer.
More than a year ago
Verified purchase
Great communication. A pleasure to do business with.
dyminsystems (15517)- Feedback left by buyer.
Past year
Verified purchase
Thank you for choosing Dymin Systems. We appreciate your fast payment!
bellsbikeshop (143332)- Feedback left by buyer.
Past year
Verified purchase
Thanks for your purchase from the staff at BELL'S BIKE SHOP! Time to RIDE!
tctparts (23893)- Feedback left by buyer.
More than a year ago
Verified purchase
Great buyer, prompt payment, valued customer, highly recommended
4pyciek (1232)- Feedback left by buyer.
More than a year ago
Verified purchase
Excellent buyer! Thank You so much!!! Fast payment! Responsive!!!! A+++++
qlequipment (11991)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.

See all feedback

Reviews (15)

New in Bag Talon Rod End Connector 60079-010 Free Ship Buy it Now=2 pcs

Dec 11, 2016

Exactly what I needed

I wanted to build a post and boom support stand for a small USB camera used as a low powered microscope. I started with laboratory stand that had a a 1/2 inch diameter vertical post. This is one of clamps that is designed for 1/2 diameter bar rather that 3/8 to 3/4 inch diameter bars. THe problem with it is the tiny square set screws. I replaced those with knurled thumb screws. I also wanted to use a 3/8 diameter boom arm. So one of the bar holes was fitted with a 1-1/2 inch long 1/2x3/8 bronze bearing. Then re-drilled and tapped the set screw hole. Dimensions: Outside Diameter: 20.5mm (0.807 inches) Inside Diameter: 12.9 mm (0.508 inches) Body Length: 39.5 mm (1.55 inches) Body Width: 37.1 mm (1.46 inches) Set screw length: 9mm (0.354 inches) Set screw thread: number 10 by 32 threads per inch Weight: 100 grams (without set screws)

Used Aluminum 3D Printer Kit Creality CR-10 Prusa I3 Print Size 300x300x400mm

Apr 13, 2018

Original CR-10

OOPS ... I just have looked closer. This is the original CR-10 with single "Z" axis motor, the V1 (green) controller, four fin hot end and 360 watt power supply. Incapable of printing anything other than PLA which, in my case, pretty much makes it useless. There was no micro-SD card but that was expected. Both aluminum and Glass print surfaces appear to be new without any scratches. In fact I can not find any indication of wear of use on the printer anywhere other than the boxes had been previously opened. Well packaged with timely delivery. EDIT: Well the case says "260 watts" but when I opened the control box the actual power supply was labeled "12 Volts, 30 Amps". Last time I checked 12x30 = 360 watts. So that was a bit of good news.

2 of 2 found this helpful

Syba IO Crest Mobile Rack for Two 2.5-Inch SATA III HDD SI-MRA25030

Oct 27, 2018

Obsolete 4 Pin Molex Power Connector

These are great little bay adapters to use in Small Form Factor desktop computer so that one has easy access to the drives. The single distraction is that they use a strange power cable to bridge power between the Sata power cable and the switch for the LED lights. Worse yet this able uses a obsolete 4 Pin Molex power connector rather than a Sata power connector. I wind up having to cut and splice new connectors to the cable for every installation. This is the same unit as the Startech part number HSB220SAT25B.

See all reviews