About
All feedback (353)
- startfitness-outlet (411750)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- jusgroot0 (445)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat communication. A pleasure to do business with.
- b***9 (1605)- Feedback left by buyer.More than a year agoVerified purchaseGreat seller. Packed very well
- mamani05 (386)- Feedback left by buyer.Past 6 monthsVerified purchaseHighly recommended buyer . Fast payment thanks for your custom.
- netsquito (20356)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
Reviews (4)
Oct 05, 2021
Bonds fast.
Sometimes you need a contact adhesive that dries quickly and grabs tight, instantly. In those circumstances, this is the glue to use.
Nov 20, 2022
Great performance for the price when tapping stainless steel
I had 60 holes to tap in 1/4" thick 304L stainless, drilled to 13/64. Not knowing how the different taps available would perform, I tried a variety, including these which were at the high end of the cost scale at $21.40 for 1 tap including shipping. With the other taps I used, I worked very slowly using plenty of thread cutting oil and found that I could cut a good thread in 20 minutes, taking only a small amount (5-10 degrees of turn) each time before reversing to cut the swarf. Despite being very careful, however, taps costing one quarter of the price just snapped without warning after forming a thread in 3.5 holes. Of the other taps I used, one cut 4.5 threads for just under 3/4 the price then snapped, twice, whilst another cut 24 holes for just over half the price and then the cutting edges began to break off. Each of those taps, however, all took 20 minutes per hole. This final tap I tried easily cut my remaining 20 holes taking just 5 minutes each. For the majority of the cut I was able to rotate the tap through at least 120 degrees before reversing to clear swarf, with the cut progressing smoothly and giving a clean thread that was much tighter than all of the other taps I tried. After 20 holes, the tap was showing almost no sign of wear and was clearly capable of cutting many more threads. In summary, this tap provides good value option, particularly if you have many holes to tap, doing the job quickly and much more accurately than lower cost options. If I ever need another, these will be my first choice.
Nov 02, 2015
Great once repaired
The unit supplied to me did not have the correct adapter fitted - it would not fit a CGA580 bottle valve. The seller paid for a correct adapter, however, and once I had fitted it, the flow meter works great. I'm using it for a tri-mix gas whilst doing some stainless welding and am able to adjust the gas flow much more accurately than I could previously with a standard supply pressure gauge.