About
All feedback (211)
- circlegoshopping (1913)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.Past yearVerified purchase,¸¸,ø¤ºGREATº¤ø,¸*¸,ø¤ºBUYERº¤ø,¸*¸,ø¤ºTHANXº¤ø,¸¸**
- websparkywebsparky (15260)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- rates-ford (134721)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- british-bearing-co (5438)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (7)
Aug 20, 2018
Great product, would have benefitted from instructions.
Good value TV wall mounts, easy to assemble once you figure out what goes where (30 minutes later). :-)
Basically the big rectangular thing fixes to the wall (level) with the big chunky screws and rawl plugs if needed (pic 1). Important: If fixing to a stud (hollow plasterboard) wall, make sure 2 of the screws are screwed into one of the wooden uprights. (Studs) use a stud finder if needed. Just fixing everything through 1cm of plaster won't be enough to hold a TV safely.
Plasterboard screws and fixings would be better for the other holes as opposed to just rawl plugs. Rawl plugs are for fixing to concrete block or brick walls.
The 2 long metal strips mount on the TV, (arrow pointing up). Use black plastic spacers between TV and metal strips (to create space between wall and TV for cables and plugs etc). And use big washers on other side of strips with 4 silver screws that match your TVs mount points. (Also use small washers if smallest screws used). You can use the arrow as a hole (like I have in pic) if the mount is still poking up over the top of the TV when using the top holes. (Pic 2)
The 2 slightly brass coloured screws go into end of 2 metal strips. Only screw them in a couple of turns initially. Hang TV on top of rectangle mount on wall, tighten brass screws from under TV to lock it in place. (This bit is a bit fiddly) (Pic 3).
Check the lower screws have locked everything in place and stop the TV from becoming unhooked from the wall mount.
They seem to do the job well at a very reasonable price. Didn't give 5 stars because lack of instructions, but otherwise brilliant.
Nov 29, 2016
Cheap simple product, backed up my harddrive
Allowed me to clone my failing iMac Hard Drive onto an SSD, which I then installed into my iMac. Worked perfectly. Cheap enclosure that served a basic one off task perfectly. I now plan to do the same with a machine at my office whose HD is starting to overheat.
Nov 24, 2019
Great product, if a little expensive
It does what it says, allows a PCI-e card to be used by my iMac via the thunderbolt 3 port. The product is well made and worked straight out of the box. I did fall for the rookie error of not realising standard height cards don’t fit in this device, without obtaining and switching the metal bracket on the card for a smaller one (see pictures). I can now connect an SAS LTO6 backup tape to my iMac. Worked perfectly. Only criticism, is the price is a bit steep for what it is. It may have been cheaper to buy a second hand Mac Pro and put the card and tape drive in that considering the cost of other purchases required, and use that as a dedicated backup machine. But overall, happy with my purchase, and that I can now backup my hard drives.