About
All feedback (738)
- thegreengrovegarden (46521)- Feedback left by buyer.More than a year agoVerified purchaseGreat buyer, prompt payment, valued customer, highly recommended.
- gorgilla (3105)- Feedback left by buyer.Past monthVerified purchaseHope to deal with you again. Thank you.
- priority_tire (483344)- Feedback left by buyer.Past monthVerified purchase★★★★★Excellent e-BAYer★★★★★Highly Recommend★★★★★
- sure-hifi (34922)- Feedback left by buyer.Past monthVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- visnel0 (1530)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- best-supplies (41009)- Feedback left by buyer.Past 6 monthsVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (2)
Nov 08, 2024
Milwaukee 3670-20 M18 FUEL 18V 4-1/2"-6"...
Milwaukee 3670-20 M18 FUEL 18V 4-1/2"-6" Paddle Braking Grinder - Bare Tool works zoom zoom Sparks are flyin
Jun 27, 2022
Good on hot roding shindaiwa trimmer/brush cutter wen used on smaller motors
Good on hot roding shindaiwa trimmer/brush cutter wen used on smaller motors 30cc and under for best results my trimmer runs as it should now if you do this mod make sure trimmer has twin main bearing a lot of cheap weed eater do not i know weird but its true but echo , shindaiwa just use a commercial unit and save your self from try to polish a t Erd.NOW as for the pipes flex joint clamp a fix is red high temp RTV gasket maker from harbor freight and a hose clap works fine and also helps with gluing the header wrap heat shield in place but ill be making a separate shield and Tig welding that flex joint is a must if you wont it looking nice and clean .but if clamping use silicon gasket maker on it.building my friend a trimmer now with a bigger carb that has adjustments and run 24:1 not 50:1 oil too gas mix.i included a pic of a random build {not mine}