About
All feedback (141)
- *****- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- digitalcure (23445)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you - DigitalCure
Reviews (2)
Nov 10, 2017
Bought 2 units
Unfortunately neither of the two units work. At first 1x was tried on Raspberry Pi Model 3B and although it appeared to communicate, temperature always reported 0 and humidity 0.1% so tried again on Arduino but always an error. Since not working I then took the sensor off the PCB to wire directly from the sensor with exactly the same results. Shame but if they don't work then I can't give a more positive review - sorry.
Nov 06, 2019
Does not work after multiple attempts
1 of 1 found this helpful Unfortunately none of the camera definitions / examples worked at all with this module / camera combo. This was with an updated arduino IDE with new ESP drivers / libraries etc. I've been working with arduino / ESP for a while now and normally been able to get things working pretty quickly - but not so with this board / camera combo. Board on its own worked - displaying / connecting to Wi-FI SSID's etc. so the ESP32 board worked as expected - but just not with the camera.
Examples upload but when starting up gives multiple errors with camera and so startup fails. Tried with 3.3v initially then with the 5v line with no effect. I'll put this down to a bad unit and it'll go into the 'bits' drawer. Sorry cant give a positive review as it just simply doesn't work.