About
Reviews (38)
May 18, 2018
some of them work...
2 of 2 found this helpful First it should be mentioned that it arrived with a smashed case. the shipping box did not show damage, so I believe it was shipped to me like that, making me wonder if the stock is entirely like this or if you might have better luck ordering a set.
As far as the actual bits are concerned, some of them are decent and others are completely out of balance making them unsafe to use. Over all there is some use in them but I can't recommend them to anyone given the safety of so many off balance bits. Not to mention if you do use a bad one anyway your rotary tool's bearings will not like you for it! :)
Feb 01, 2018
3 of 5 are OK
3 of the 5 I ordered are OK and work, 1 of 5 leaks like crazy and another 1 of 5 fell apart in my hand when I twisted the adjustment nozzle. see the pictures. I'm guessing that the assembler deliberately smashed the brass fitting to get it to slip into the plastic tip which was too small. This wouldn't have been a problem except the plastic piece split down the side. And the leaky one did not easily pull apart so I don't know what was making it leak. 2 defective out of 5 is pretty sloppy quality control IMO.
Jul 27, 2017
Slightly bigger then desired for 18650 batterys
These are just slightly larger inside then the previous ones I ordered from a different listing which look identical by the pictures. So where the first batch I have fit 18650 batteries perfectly, these allow the batteries to rattle back and forth when closed. not much, just a little making them a little disappointing to me in comparison. However they are still decent and usable.