2 x H3 LED Yellow High Power LED Bulbs For Fog Lights Lamp 10SMD 5730 LED Amber
Dec 16, 2016
Here is the problem with most of H3 bulbs that have this length
They are too long for any reflector house that is designed for an H3 bulb. The reflector is designed to capture from a focal point where an H3 bulb's filament sits. What you end up with having the LEDs 1/2" farther out is a 4 point start pattern, draw this bulb back out of the housing and then it is focus.
Another issue was , as they sit, the little convex end hit the glass of my fog light!
Since I couldn't return, I cut the back flange off the bulb and moved it all the way up to the base of the bulb. That worked but took some effort.
Look for a bulb with THAT configuration, flange at the base of the bulb, as far as it will go towards the round holding the LEDs, they are out there
0 of 1 found this helpful
Genuine Cummins Pressure Sensor 4928593 for 15 liter ISX/QSX engines.
Oct 22, 2024
worked great
tried the replacements and the connector would not lock and the computer did not like them
Carchet Wireless RV Solar Tire Pressure Monitor System TPMS 6 External Sensor
Jul 11, 2018
Works Great, Affordable, just deal with BAR as units of pressure
Worked fine on a 40' Motor Home. The unit can handle up to 8 bar = 116PSI. The only rub is the display can only display 99psi. THe problem comes in setting the high warning in psi, 99 not enough. SO you have to deal with bar, then it works find. Set the units to bar. Set the high warning to 8bar and the low warning to 5.5 or 6 bar.
Other than that, the unit worked great and is very affordable