About
All feedback (226)
- tractorpartsasap (103103)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- jbrodie81 (37)- Feedback left by buyer.More than a year agoVerified purchaseA++++ buyer fast payment. Quick response.
- globalpartspro (113226)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. 5 Stars.
- perrypower (25410)- Feedback left by buyer.More than a year agoVerified purchaseThank you for your purchase from Perry Power!!
Reviews (4)
Jan 17, 2017
Spot on, pun intended :)
I bought 3 of these, 2 for myself and 1 for a friend. They are separate items which is good so if you want to just use the laser or the light you can mount them accordingly. First one I mounted was on a Ruger SR9C and it didn't need any adjustments. Both devises have slide switches so they can be turned off/on interdependently. The laser comes with a wired remote pressure switch that does work however it's a bit difficult to put it in a usable position on a hand gun and it doesn't come with any means to attach it. That being said, I still think these are outstanding value and I'm pleased with my purchase.
Jun 15, 2020
Needs Modification
The product works but to fit properly I had to modify it slightly. The back portion that sets in the console wasn't tapered enough to match my 2017 Ram 1500 console. This kept it from setting all the way down. The lid would close but I could feel the extra tension it was putting on the latching mechanism so not wanting to damage it I decided to taper the corners of the tray a bit. I used a torch to heat the plastic to form the corners with more taper. I could have used a file as it only needed about a 1/16 if an inch on each side but the torch worked fine. I don't know if this would be an issue for all trucks but writing this for others who may be considering purchasing it.
Dec 04, 2019
Exact replacement
This was listed as an the replacement for the older model in my Hot Point gas range and it fit purrrfectly. I did have to remove the top mounting bracket from the old valve and install it on the new one but I knew that because it was shown without one. I also had to adjust it for propane gas as these are usually set up for natural gas from the factory.