About
Hi, I m Chris. My wife Jen & I started C&J Auto Sales 17 years ago and since have enjoyed meeting so many great customers! We are a small mom and pop business with 0 employees. We keep our overhead low to allow our customers the best value possible.
All feedback (2,093)
- indu-home-us (113)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- carpartswholesale (3341235)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- mek-motoo (8202)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- sherco_auto (26880)- Feedback left by buyer.Past monthVerified purchaseGreat communication. A pleasure to do business with.
- meatballaaron2010 (1100)- Feedback left by buyer.Past monthVerified purchaseHope to deal with you again. Thank you.
- maharushie (1345)- Feedback left by buyer.Past monthVerified purchaseThank you for your purchase!
Reviews (18)
May 21, 2019
Fuel pump driver module on Ford trucks
These fuel pump modules are a common failure point due to corrosion causing several drivability issues including suspecting a bad fuel pump. The bottom line is this. If you suspect a bad fuel pump, simply plug one of these in first. If it doesn't cure the problem, leave it in and replace the pump. They should be done together to do the job right. Don't forget to replace any applicable fuel filter at the same time. Another good idea is to replace the fuel pressure rail sensor. The diaphragm often fails, causing more drivability issues, and raw fuel to flood the intake manifold through the vacuum hose and dilute your crankcase oil. It will Hydro lock the engine causing catastrophic failure. Buy the sensor directly from Ford, the China ones do not last, and you'll be doing the job again in a few months.
Nov 08, 2021
Aftermarket Chinese parking brake release lever for GM truck
The plastic end that goes through the mounting bracket has 2 tabs that hold it in place. This plastic is so flimsy that one tab broke off during installation. It still releases the brake even though it flops around is the only reason I gave it 2 stars. A cheap quality part at an equally cheap price.
Jan 31, 2018
Not worth the time it takes to install
1 of 1 found this helpful There are 2 braided hoses that must be installed underneath the faucet. They require an 11mm sized wrench but the last one cannot be tightened due to it's poor shielded design. even with a crowfoot wrench, tightening the second hose is impossible. The O-rings on these braided lines leak no matter what you try to do. The neck of the faucet moves around swaying back and forth even after tightening down the main lock nut ring. This is by far one of the cheapest, flimsiest, POS faucets I have ever encountered (and I have installed quite a few in my life). Save your money and time on this. Buy a Quality, more expensive name brand. You will be better off. Really.
On the positive side, it looks nice and it's shiny. It's also recyclable.