About
All feedback (1,794)
- kernel283 (708)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- sterling_job925 (3567)- Feedback left by buyer.More than a year agoVerified purchaseGreat eBayer. Immediate Payment….
- n***a (540)- Feedback left by buyer.More than a year agoVerified purchaseArrived promptly, packaged well and exactly as described. Thank you
- *****- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
- appliancereworkcentre (7692)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- anotherlevel (4959)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
Reviews (4)
May 19, 2021
Much better value than buying a new sidelight assembly!
The 'angel eye' sidelights on my E90 stopped working. I removed the sidelight bulb holder from the main headlight, and carefully disassembled the bulb holder. I had to use a Dremel to make a very small notch at the base of the reflector so I could remove the old bulb (the bumps on the bulb prevented it from coming out). I then fitted a new bulb in its place and put everything back together. It now works a treat, and the job took about 15 mins from start to finish.
Jan 04, 2017
Hob now working perfectly again
I noticed all four rings on my Stoves electric cooker seemed to be unable to regulate their temperature and ran too hot all the time. I bought one of these Belling regulators to see if it fixed one of the rings and was pleased to discover it did. I then bought another three to replace the remaining faulty regulators. Now my cooker works as it used to. Installation took about 10 mins to do all regulators.
Aug 25, 2023
Great value for DIY underfloor heating testing
Purchased to test my newly-installed underfloor heating system. Couldn't justify spending £80+ on a test pump from a UFH supply store when I was only going to use it once, and I'm glad I didn't because this pump worked very well. The only thing that would make it better is if it came with a 1/2" BSP female to 3/4" BSP female adapter so it could connect directly onto the 3/4" BSP male thread of my UFH system. In the end I used a combination of applicance hoses and flexible tap tails I had lying around to connect it up correctly, but it worked fine and didn't leak.