About
All feedback (455)
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- arkotractorparts (17576)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- mattverdill (21110)- Feedback left by buyer.Past 6 monthsVerified purchasePleasure to do business with you!!!
- *****- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- agnlawn-com (123127)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (3)
Jan 28, 2020
These are worth every penny.
With these brake lines it made life much easier when it came time to do them in my truck. They are good quality and a very cost effective option for doing brake lines in your truck. By the time you buy the rolls of brake lines and all the flare nuts and do each line one at a time on your own while cutting and flavoring them. You'll end up having more time and more money into your truck than just buying these and having a quick and easy 3-1/2 hour install and all are done.
Oct 03, 2017
Good seller, poor product design
2 of 2 found this helpful Dyna s ignition does not fit you gl1000 without a little customization. The way the magnetic pickups are placed on the mounting plate allow no room for your 2 timing adjustor screws to screw in and tighten the plate. Unless you file down the plastic on the outside a little to accommodate for the screw. Other than that if you static time the bike it will fire right at the F mark on the initial mark you static set the timing at. Then you rotate it 180° to check the F mark again and it will fire 2.5° before TDC so you have to split the timing and it will run decent. Not a bad set up just some poor planning/ product design on Dyna's part. Otherwise I'm satisfied with the sellers shipping and it has nothing to do with what they did.
Dec 03, 2019
Great value, Good quality.
Fit my 621 bellhousing with a HD 11" clutch and 163 tooth flywheel. Starter is great value and good quality. Needed no shims for my application. Would recommend and will buy another if I ever needed to. Thanks!