About
All feedback (100)
- n***9 (455)- Feedback left by buyer.Past yearVerified purchaseWell packed and as described
- sdpmanchester (15399)- Feedback left by buyer.Past monthVerified purchaseHope to deal with you again. Thank you.
- reddipartsgroupllc (12718)- Feedback left by buyer.Past monthVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- shaya_5828 (1213)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- jrocs_happyhaul (64)- Feedback left by buyer.Past 6 monthsVerified purchaseThanks for your purchase! Enjoy!
- *hot.deals1* (59892)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
Reviews (4)

Oct 15, 2019
Great buy - if you don't mind dinking around a little.
Those "yesses" above are all qualified!
I recommend it unless you need a sink all of whose angles are predictable. Nothing is quite square or whatever other angle you might be expecting. Relative to the general plane of the top, for example, the drain does not point quite straight down - more like 4-5 degrees off vertical. I would NOT try to support this with the provided holes alone. I ran wooden supports the full length of the two wall-mating surfaces, and had much greater stability (and safety).
It's of good value if you're installing it yourself and don't mind spending the time (as above) to do it right. If you're paying an installer, they will charge you for the necessary time or they won't do a proper job.
It appears to be of good quality with respect to the weight of the material and of the finish, just not with respect to the dimensional considerations.

May 17, 2018
delivered as advertised, and then some!
dealer sent an extra, slightly different switch just in case the first wasn't exactly what I needed. What a deal!

Jan 15, 2019
OK, just don't strike sharp items like sheet metal edges.
Delivered as agreed. Plastic body and head are soft enough that they will cut fairly easily if you strike the edge of something sharp, such as ducting sheet metal. Other than that, tool seems to take a beating successfully. I'm sure it will work fine for setting tile, for example.
