About
All feedback (242)
- schgsyi (86)- Feedback left by buyer.More than a year agoVerified purchaseBest experience with a buyer to date! Welcomed my paying a little more for the signature requirement and followed up to let me know the delivery and product came as advertised. GREAT buyer!!!!
- bestsensor (3823)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- incycle-bicycles (32470)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat communication. A pleasure to do business with.
- andresells (2741)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- futurelook11 (119008)- Feedback left by buyer.Past 6 monthsVerified purchaseExcellent buyer. Hope to deal with you again. Thank you!
- *****- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
Reviews (4)
Jan 08, 2020
Better than I expected
Jun 15, 2021
Good Enough for light use. Not for use in BAD neighborhood
What you would expect.
Mar 14, 2019
Works if your willing to do the work
1 of 1 found this helpful The device works as described but, the point of buying this key was to do it my self , not call a locksmith. You can not program the remote entry unless the key is mated with the ECU on your vehicle. I was able to program the immobilizer chip on a 99 Rx 300 using the following procedure.
Program Imobilizer Key
⦁ -Enter the car with a working pre-programmed key and close all doors.
⦁ Simultaneously depress and release both the brake and the accelerator pedals.
⦁ -Within 5 seconds, insert the working pre-programmed key into the ignition. Do not turn the key.
⦁ -Within 15 seconds of inserting the ignition key, depress and release the accelerator pedal 5 times.
⦁ -Within 20 seconds, depress and release the brake pedal 6 times.
⦁ -Within 10 seconds, remove the working pre-programmed key from the ignition.
⦁ -Within 10 seconds, insert the newly cut transponder key into the ignition.
⦁ -Depress and release the accelerator pedal one time. The security light should now begin flashing to indicate that the computer is reading the new key and programming the system.
⦁ -Leave the new key in the ignition for at least 60 seconds. When the security light stops flashing, the programming process should be complete
⦁ -Start the vehicle using the new key to verify that programming was successful.
⦁ Last edited by Daddy-O; 01-28-03 at 09:27 AM.
⦁ Daddy-O is offline Reply