About
All feedback (296)
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- expressbodyjewelry (112537)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- car-fashion777 (4061)- Feedback left by buyer.More than a year agoVerified purchaseThank you for your support. Look forward to your next visit.
- m2-racing (139724)- Feedback left by buyer.More than a year agoVerified purchaseThanks for shopping with M2-RACING!!!! Great eBayer!!! A+++
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
Reviews (1)

Jul 16, 2017
Decent backup can package, but little to no instructions/useful spec information.
The round cams are a higher quality picture with non distorting lenses. The round ones are not mirrored but can be mirrored by cutting the wire.
The rectangular cams have a lower quality picture but a fisheye lens. The rectangular cams are always mirrored and can enable parking lines by cutting the wire. These cams cannot have an non-mirrored image without other means.
The cams can be disassembled and rotated from the housings/brackets to allow the image to be upright however they are mounted. The round cams are quite limited for viewing angle adjustment compared to the rectangular ones.
Overall it's a decent setup which isn't too difficult to install after doing a little google/YouTube "backup camera installation" research. It's nice that it only requires one power cable for all cams and the monitor.
The green remote/trigger wire does not need to be connected to function. If you do not want the monitor to automatically switch display to Back cam with the reverse lights or another triggering feature.
The monitor has the 4 cams labeled as follows: Wire marked CH1 - FRONT, CH2 - BACK, CH3 - LEFT, CH4 - RIGHT. As far as a I know these labels cannot be removed or changed, but can switching a cable to another input is not an issue since all the connectors run off the same harness.
The monitor has a Mode button which cycles through just about every input/picture in picture display configuration you could want. There are also buttons for each of the inputs as well.