Bald Eagle Wings of Freedom Fernandez Porcelain Plates - set of 2!
$175.000 bids5d 3h 22m
All items
Vintage Sheaffer Fountain Pens & Desk Set
$150.000 bids5d 3h 28m
About
All feedback (130)
- rickmancc (3197)- Feedback left by buyer.Past 6 monthsVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- rubberdowncycling (13449)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
- dr.nick.riviera (2144)- Feedback left by buyer.Past 6 monthsVerified purchaseFast payment, great buyer. Thanks!
- avaconnect (513)- Feedback left by buyer.Past yearVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- sesang0 (58)- Feedback left by buyer.More than a year agoVerified purchasesatisfied
- yaquelinmachinmuniz (1113)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended. Thanks
Reviews (4)
Aug 08, 2017
Galfer brake lines worked well on Yamaha WR250R
The Galfer brake lines (front FK003D198CR & rear FK003D413R) worked well for my Yamaha WR250R with two type adaptations:
1) There were spots where these lines were smaller in diameter where they passed through OEM clamps compared to the OEM rubber lines so that they were loose in the clamps. I either wrapped the Galfer lines in silicone tape (Rescue or F4 style tape) or cut off a "wrapper hose" from the OEM rubber lines and wrapped & zip tied the wrapper around the Galfer line so it held in the clamps well. 2) The stainless banjo bolts shipped by Galfer had bolt heads requiring a 14 mm socket or wrench (where the OEM banjo bolts needed a 6 mm Allen wrench). Ideally the bolts from Galfer would also require 6MM Allen wrenches for "tool consistency". Indeed, tool access to the 14 mm heads would've been difficult (impossible?) with wrenches/sockets in the tight surroundings for the rear brake set... (but were use able on the front). I re-used the OEM banjo bolts w/ the new crush washers Galfer provided on the rear so I could access them with 6MM Allen tools. In retrospect, I wish I had done the same on the front too... just for tool consistency. But all is good...
Nov 22, 2017
Fixed my clogged washer nozzle issue!
Could not clear a blockage in my old windshield washer nozzles despite attempts via several methods... but the replacements solved the issue - like new again!
Nov 22, 2017
Fixed my clogged windshield washer nozzle issue
Could not clear a blockage in my old windshield washer nozzles despite attempts via several methods... but the replacements solved the issue - like new again!