About
Reviews (2)
Jun 18, 2017
Did not even last 3 hours after putting it up before...
This canopy did not even last 3 hours after setting this up on a sunny day with only light winds.
the tap you tie the tiedown cords to fall off and the hook and loop tie started to fall off too.
we finally took it down because it became more a problem keep it up then if we just did not have it at all. Total junk ...and if you buy one do not blame anyone but yourself after reading this review.
Apr 21, 2016
Well worth the money, a great buy
This is the only way you should be balancing your mower blades. I used to thing I was doing it right with the nail method, that method is useless and will cost you money in replacement bearings and spindles. The tabletop cone method is a little better but still leaves doubt unless you get the blade centered perfectly on one of the cone steps. This method and this balance are the way to go. I even balance brand new blades with this and some on them are way off. I own a double cut HONDA push mower and balanced the blades and the mower has never ran so smooth or so quit. I also own a John Deere Z-turn and I balanced all 3 blades with this tool, mind you I thought I was balancing the blades before, but same thing with the Z-turn as with my push mower. My Z-turn runs smoother and cuts better then when it was new. Plus with this tool I can check if one of the blades is bent and some of the newer blades you can't just rest then on a flat surface anymore because of the shape of most newer blades. The only reason I don't give this tool a 5 star rating is that they put a cheap nut on the back that holds the nose cone to the base. That nut needs to be a nylon nut or put a drop of Loctite on it before you screw it to the wall or like me you will be removing the balance in a few days to tighten the nut, so just save some work and learn from me and just take care of it before you screw it to your wall and you will be all set. Bottom line is buy this tool, balance all your mower blades.