About
All feedback (986)
- fssteeringwheels (22592)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended. -Forever Sharp
- sellermotor (2360)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- oemcycles (571704)- Feedback left by buyer.Past monthVerified purchaseWonderful buyer, would recommend!
- oldschoolhdmike (4795)- Feedback left by buyer.Past monthVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- motorcycle_dreams (3995)- Feedback left by buyer.Past monthVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- easternpc (392467)- Feedback left by buyer.Past monthVerified purchaseHope to deal with you again. Thank you.
Reviews (3)
May 09, 2020
Awesome exhaust, but needs work for use with hitch.
This exhaust sounds awesome and is of good build quality, but if you have a hitch be warned it will take some minor modification as the stock muffler mount is on the opposite side and interferes with hitch. I cut off the borla's rear rubber hanger mount rod and clearanced the exhaust pipe with a hammer, then ground a soft radius curve into my hitch to make some room. I then blocked up the muffler where I wanted it, flipped the mount rod (that I had previously cut off) 180 degrees and welded it to the top of the exhaust pipe. Everything is very close but it does NOT bang around or make noise while driving. Tools needed are grinder and small welder, or have an exhaust shop tweak it for you. Hitch is from Curt.
May 28, 2020
Improved ride and look.
I'm very happy with the s tech springs on my '11 corolla. They are progressive rate unlike the stock single. They still have a good comfortably ride but are noticably stiffer and more sporty. Handling is definitely improved and now I need new tires to take full advantage.
My only point of contention is theyve been on for 2 weeks and about 500 miles and are not down a conpkete 1.5" yet, more like 1.2". But i am told they settle over time and have been occasionally measureing them, initially they only dropped it .75" but have since come down further. My car being relatively low miles I'm assuming the stock springs were not sagging based on my measurement.
Overall very happy with them and was an easy install, about 3 hours total working leisurely.
Mar 03, 2020
XJ compatability
Solenoid has correct factory plug for '81 xj750 bit rubber mounting grommet mount slots are narrower than factory. Not the end of the world, i stuffed it in the original rubber mount but new one could be made to work.