Ordered these to use with my Kubota L3940 with loader. Arrived quickly, much heaver weight and quality than I expected. Should last for years. I can't imagine what I would lift to cause these to fail. Appreciate the adjustable spacer bar and the chain attachment slots. I will probably buy some chain to wrap around my bucket to help spread the load. The screw pucks hold securely, though, and provide for quick and easy on and off. Set the width you need, tighten down, and off to work you go. Seem to be a well-designed product that enhances the many uses for the loader.
Verified purchase: Yes | Condition: New
Bought these to use with my Mahindra 1526 and couldn't be happier. With and "bolt on" accessory you have to deal with the occasional re-tightening of bolts, and these are no exception. I usually check mine after every 4 or 5 loads of brush depending on how heave they are and how much jostling around I have to do to pick the brush up. These (1,500lb rated) forks are the perfect match for my tractor. Be aware, lifting heavy objects WILL put small bends in your bucket where these are attached. It's gonna happen. But I've lifted tree stumps with mine that were every bit of 1,200lbs and the bucket bends are very minimal and not on the cutting edge. If you plan on using these day in and day out lifting heavy items, unless you have a reinforced bucket, you might want to search out another option like a fork system that you can interchange with the loader bucket. These have saved me hours of backbreaking work and if a little dimple in my bucket is all I get, I'll gladly make that sacrifice. Even knowing now what I didn't know then, I'd buy them again in a heartbeat. Do NOT get a pair without the stabilizer bar. You WILL NOT be able to use them. It keeps the forks in alignment. They'll go askew without it. Be sure to tighten them up every so often and you'll love the work they save you. Best. Investment. EVER! Hope this helps. Troy 47/M/TXRead full review
Verified purchase: Yes | Condition: New
They're packaged well, easy to install and fit very nice. Welds are nice and overall construction looks good. In the same day I used them to unload a pallet of kids ATV's that weighs 700+ pounds and later that day unloaded a 1200+ pound skid of solar array panels on our place(done on a Kubota L3200 w/ LA524 FEL). No flexing or loss of integrity just solid performance. What more could you ask for?
Verified purchase: Yes | Condition: New
I bought these pallet forks to move and stack large logs on my property. I tried them without the stabilizer bar and found that they not only moved laterally but they would sometimes fall off as I was backing a log from the pile. When I added the stabilizer bar they worked perfectly! They did not move and they stayed on the bucket. I chose these because the welds looked better and the clamp looked stronger than the Chinese forks. It was a little more but I feel they are worth the money. I would buy them again.
Verified purchase: Yes | Condition: New
The best thing about the forks is how easy they are to put on the bucket. One person can do it with no trouble at all. Wish I would have gotten them a long time ago. Well worth the money .
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Forks & Fork Extensions
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Forks & Fork Extensions