Okay so a bunch of things can a might go wrong using this. It was a little cool when I set up to do this ,not cold but cool. I shook both containers once I got them and placed them in a hot bath and left them for about an hour. I took one out androcked it as the instructions say for about 2 minutes and checked the temp with my lazer. If it’s not at 80 degrees you’ll get a low yield. I had the best luck if I changed the nozzle often and used the one with a notch as it sprays a fan pattern instead of a stream.the walls need to be warm also but it’s hard when it’s cold to get them up to 80 best I could do with my heater was 60. I seemed to still get full yield but I did a thin flash coat and then ran back over after it with a heavier spray coat after it had time to heat up. There was a lot of little things I did to increase the yield I did have some bottles that didn’t produce well but I believe I didn’t change the nozzles often enough and had used the hose one to many times. If you get this on you it’s stuck make sure your hair is covered well and use the Vaseline they give you for your exposed skin. Read full review
Verified purchase: Yes | Condition: New
I’d like the product however the gun in the novel that they furnished or not very good we actually had troubles I’m getting the job that we wanted done due to that but overall we got a good job and it seems to be insulating very well if I ever use it again I will talk to them about getting more novels or possibly better ones
Verified purchase: Yes | Condition: New
This product works great and a good tip so it sprays well is to climate control the area to about 70 degrees before spraying and to heat up the tanks in an aquarium or a bathtub before spraying for maximum foam output. Also I’d like to add that you should generally never pull the trigger all the way as it is highly pressurized to ensure that all the chemicals will come out of the tanks.
Verified purchase: Yes | Condition: New
Live in Michigan, so had to wait for a warm day. Was just over 70F when I broke out the kit. I had the tanks in the house in front of warm air vent prior to this. Gave them a good shake and started spraying. It did a great job. Not sure I got the 600 feet but my skills are lacking and I did what I needed to do. It's actually quite fun. You can feel the heat from the reaction. I did my garage in sections, some days were hotter and the foam did work a bit better in the extra heat. I also got better at application. Fills great, seals great and garage is stronger and less echo now. Very pleased, I need more for ceiling so I'll be back. Could do with more fan nozzles. :)
Verified purchase: Yes | Condition: New
The quality and application are excellent, but it is a bit pricey. A friend of mine (who sprays for a living) can buy the same product (I don't know what brand) for a little more than half the price on the internet.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Insulation
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Insulation