 |
The ignition system on my furnace would not light the furnace. I checked for propane and it was there. I checked the igniter probe and cleaned it a bit but still no ignition. The flash code was working properly. Swapped the board, plugged everything in, turned up thermostat and the furnace lit up just like it was supposed to. An easy fix and didn’t take long.
Verified purchase: Yes | Condition: New
After having a HVAC pro come and assess my issue, quoting over $500 to replace my control board, I took to ebay and found/ordered one within 15 mins. Once received, it was a simple as swapping wires from one to the next (my 15 year old did it). We're up and running good as new. BTW... prob was the igniter would not light up. Gas would come on three times and try to ignite then would shut down. Would flash twice. My advise.. do it yourself if you can.
Verified purchase: Yes | Condition: New
It works better than the original board. It heats the room better because it seems to have a second stage in the heat cycle. The ignition circuit gives a more positive sound when it pulses and it pulses for a longer period of time allowing for a sure flame start. As far as quality is concerned I don't know... time will tell.
Verified purchase: Yes | Condition: New
Exactly the same as original circuit board. The heater works perfect again.
Verified purchase: Yes | Condition: New
This is a great product at a great price and it was very fast shipment plug and play very quick fix looks like a good quality board we will see how long last but I do recommend very good people to work with
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Central Furnaces
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Central Furnaces
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
