1 x ON/OFF Rocker Switch Laser Etch with "Fog Lights" Symbol. This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP. Lower LED is independent and can be wired to separate dash light circuit.
I have about 20 of these switches in my Isuzu overlander. They have a pretty standard size housing allowing me to use them in my bases with only one minor modification. I have a few bases from a Lincoln and a Crown Vic and they pop right in. Most of my applications are 14ga with 40a relays. Some throw power and some throw ground depending how I chose to wire them. They’re tough little switches that see some mud, dust, rain and ice. I’ve never had a failure with years in service. I’ve caught some auctions as low as $3.89 and have 4 or more custom laser etched switches that were $15.95 each. The LED shine as they should and I’ve chosen blue for my backlight on all but two red illumination switches for my emergency lighting. I think they are a good value. Chinese of course but so is my iPhone.