Confirm this item fits
Add your vehicle to make sure this item fits and qualifies for free returns.
Picture 1 of 7
Picture 1 of 7
Exhaust Manifold 6cyl 198 3.7 & 225 3.7l Dodge CHRYSLER Plymouth Pickup Van Car
JJ Original Equipment (20141)
99.4% positive feedback
Price:
$199.95
Free shipping
Returns:
30 days returns. Seller pays for return shipping.
Condition:
DODGE VAN 70-71 300 Series; 6-198 ,6-225. DODGE VAN 72 100 Series; 6-225. DODGE VAN 72 200 Series; 6-225. DODGE VAN 72 300 Series; 6-225. DODGE VAN 73-80 100 Series; 6-225. DODGE VAN 73-80 200 Series; 6-225.
- Buy It NowExhaust Manifold 6CYL 198 3.7 & 225 3.7L Dodge Chrysler Plymouth Pickup Van Car
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandAftermarket Products
Manufacturer Part NumberEX802C
eBay Product ID (ePID)3014145007
Product Key Features
Fuel TypeGasoline
FeaturesBare
Performance PartNo
MaterialCast Iron
Substrate MaterialIron
Dimensions
Item LengthFull-Length
All listings for this product
Ratings and Reviews
Most relevant reviews
- Sep 25, 2018Top favorable review
Very happy.
Actually time will tell how good this product turns out to be. My first impression is how much heavier this part is over the 50 yr old original, with 59k miles on it. I could not find a manifold stating that it was for a 170 CID slant six. So I took a chance on this one. Fit like a glove- with a couple minor modifications. 1, still and tap the second hole for the choke thermostat. No big deal as the pilot hole lined up with the old part. Why it wasn’t already tapped- who knows. Also the inner hole for the intake manifold mount to the exhaust manifold has a larger bolt hole than original. I reamed the hole larger in the intake manifold to install a larger diameter bolt. Plenty of material- so no problem. I used the thick “repair” type gaskets. It sounds like a new car now! For the price- I’m very happy.
Verified purchase: YesCondition: New
- Mar 03, 2021Top critical review
Get what you pay for
Externally it's nice. Internally it looked/felt like the inside of a cinder block. 5 hours with a carbide burr and many sanding rolls to fix that. The pipe flange studs on the stock unit are 7/16". This one came with 1/4" and one hole is badly off center. Going to a machine shop to get that fixed, which will add another $100 to the cost before it's useable. I am not going to risk a broken stud later on. I need reliable, going to keep this truck for a long time. These reasons are why it is not $325 like the Dorman unit. These steps are not necessary if you are going to sell the vehicle to someone you do not like. If you want reliability and a cheap price, be prepared to do some work and spend a few more bucks. Without the extra effort it WILL carbon up and choke closed over time and snap studs at the pipe if the motor mounts aren't fresh.Verified purchase: YesCondition: New
- Jan 01, 2020
Grinder work will need to be done on a custom job.
I had to spend a LOT of time, grinding out the casting flash in this manifold... BUT...I'm building a custom engine for a 27 roadster, and am doing a Weber 2 bbl. conversion. I had to port match this manifold, but there was plenty of material left to do it. If a person is going to do a stock replacement, it will work fine.. But if they want something a little better than stock, they will have to do a lot of die grinder work. Made in China, is a good deal....BUT...for a custom one off piece, it will need some work. For the price I paid, it was a good value. But be prepared to spend at least 4 hours hogging out the ports. SO...I give it a rating of 4 stars.Verified purchase: YesCondition: New
- Jul 04, 2018
Slant 6 manifold
Had to alter this manifold right out of the box. Drilled 3 holes to make it fit and line up with the intake manifold. Also had to tap one of the holes for the choke! Be careful with this product! There's probably better quality out thereVerified purchase: YesCondition: New
- Apr 10, 2018
Average at best
This manifold is average at best, but at less than $100 it is to be expected, on my particular piece I bought only one of the choke mounting plate bolt holes tapped, the other was completely untapped, the center bolt hole to attach the manifolds together was bored to a larger size stock. If you are alright with modifying it to fit all models, it'll be fine.Verified purchase: YesCondition: New
- May 16, 2018
Good fit, good price
Overall quality appears quite good. No visible porosity on the metal and nicely machined surfaces. Has the double rib reinforcement to help prevent future cracks. Reading an earlier review I can confirm that 2 of the bolts that hold the intake and exhaust manifold together are 5/16 x 18 and one is 3/8 x 16. Maybe this was an update on later manifolds but either way I view the larger bolt as a plus. I am pleased with my purchase and would buy it again and recommend it to a friend.
Verified purchase: YesCondition: New
- Sep 23, 2022
Exhaust
The manifold worked great only problem is you have to clean up the casting for the intake to fit properly otherwise for the price it is very good.Verified purchase: YesCondition: New
- Aug 08, 2025
Looks Great
I have not had a chance to install it yet, and it will be several weeks before I do, but the quality of the casting looks great, surfaces are very clean and machined well. Price is excellent, considerably less than Dorman or other suppliers. I will try to update once installation is completed.Verified purchase: YesCondition: New
- Sep 27, 2021
Great aftermarket replacement manifold
Used to replace the cracked and shattered exhaust manifold on my Hesston swather with a slant 6. Appears to be a quality replacement and went through a hay season without a hitch. Highly recommended if you have a cracked slant 6 manifold.Verified purchase: YesCondition: New
- Jul 23, 2022
Exhaust Manifold
Excellent quality part and price was good .Verified purchase: YesCondition: New
