 |
This is a good repair kit if you need to replace the head gaskets. I had to replace mine because the head bolts backed out due to vibration. Please note: So you don't have to make this repair again, spray the gaskets with Permatex Copper coat and spray the threads of the head bolts as well so that they can not vibrate loose again......If you do that, you probably will never have to tear down your compressor ever again unless it needs a top to bottom overhaul.
Verified purchase: Yes | Condition: New
Looks like it’s made from the same material that Ingersoll went to. Fit was perfect. I used ARP bolts for the class 10.9 vs the original 8.8 bolts. Time will tell how well the newer material holds up.
Verified purchase: Yes | Condition: New
This set is a perfect match for my IR SS3 compressor. It took just a few minutes to install the gaskets after I cleaned up the valve assembly. Compressor is running perfectly.
Verified purchase: Yes | Condition: New
Installed this new gasket set and fixed my problem of no building pressure, don’t replace your compressor before check for broken gaskets
Verified purchase: Yes | Condition: New
Fit perfectly on my SS3 compressor pump. Thick and seems to be good quality.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Other Air Compressors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Other Air Compressors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
