 |
Great product. Compact size, low profile footprint, and is durable. Shop this product carefully as the price is all over the map. The first time I bought it the cost was $63.04.....for a product I never received, it’s Replacement was $45, and came all the way from the east coast. The first one took a week, and was less than miles from me. Watch very carefully who you are dealing with, and DON’T ACT IN RELIANCE ON THE MONEY BACK GUARANTEE. Then just today I found it for $19.98 ea. Brand new. The product is great, but the price fluctuates.
Verified purchase: Yes | Condition: New
The motor is well made and fits the Walthers 90 foot turntable perfectly. That being said, the motor would only move the turntable deck through a 180 degree arc before the gears started to slip. This is not due to any fault of the motor but is most likely caused by an out-of-round or off center issue with the large gear driving the turntable deck. I addressed this problem by removing one of the motor mounting screws and loosening the second screw just enough for the motor to pivot freely. I also removed the 2 positioning nibs in the turntable pit base cover that mate with holes in the motor housing. I made up a tensioning spring of sorts using a piece on thin brass stock folded in half which I positioned between the motor and the turntable base cover. This allows the motor's gear to stay in contact with the large turntable drive gear. Read full review
Verified purchase: Yes | Condition: New
Years ago I bought a Walthers 90 foot turntable which at that time came with a motor. The motor mounts etc were primitive and it never worked properly. In recent years the turntable and motor became separate purchase items so I decided to see if a new motor would fit in my existing turntable. It did and worked the first time I tried it. So for me, a $25 motor was a good deal and solved a vexing problem.
Verified purchase: Yes | Condition: New
This is a very good product. It allows connection through and switch. It doesn't require a minimum voltage and works through 1V-12V.
Verified purchase: Yes | Condition: New
It's very small, fits turntable base, you have to figure out how to control it. It's 12 VDC, not that hard to figure it out.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Buildings, Tunnels & Bridges
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Buildings, Tunnels & Bridges
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
