Picture 1 of 1
![Stock photo](https://i.ebayimg.com/images/g/K2sAAOSwtbBe54EH/s-l640.jpg)
![ProMag for KEL-TEC P-11 9MM 10 Round Magazine Blue Steel - KEL 01 - Picture 1 of 1](https://i.ebayimg.com/images/g/cdEAAOSwmehhr-3g/s-l500.jpg)
Picture 1 of 1
![Stock photo](https://i.ebayimg.com/images/g/K2sAAOSwtbBe54EH/s-l640.jpg)
![Picture 1 of 1](https://i.ebayimg.com/images/g/cdEAAOSwmehhr-3g/s-l1600.jpg)
I have not used them yet, by that I mean that I have not fired any round with these magazines I have only loaded and put them in and dropped them out and everything seem good. I would have no problem buying more. Very prompt delivery.
Verified purchase: Yes | Condition: New
The day I received this magazine from pro mag I had problems with it sticking inside once it was in place it woukd not eject out by pressing the release button ,I have to use pliers to grab hold of the bottom of the magazine and while pressing the release button pull it out .There has to be a defect in it I have two other Kel tec brand magizines that come out very very easy when the release is pressed .This is the first pro mag I have ever purchased and I don't think I will by another one if they don't fit I was scared to load the ammo in it and it get stuck in the handle and not come back out It should be replaced by a new one or refund by Pro- mag
Verified purchase: Yes | Condition: New
After receiving this mag, I oiled it first then tried to load some rounds into the mag. The cartridges were very difficult to load and were crooked, not straight. I compared it with my OEM mag. and found the slide to be narrower, the top of the mag to be what looked like deformed somewhat. I managed to get 10 rounds into it finally after a lot of work. I haven't tried to shoot using it because the shells just don't look to be in a safe position. Instead, I ordered an OEM mag. to be safe. To me, the ProMag just looks unsafe......
Verified purchase: Yes | Condition: New
Ran a full magazine and a 1/2 magazine load and it failed to properly feed rounds to the chamber, one nosed down and one nosed up so bolt would not close. Once cleared, the rest of the rounds fed thru OK. First time it was the 2nd round and second time it was 3rd from last round. Maybe OK at the range but would not trust my life with this magazine. Not as well made as MecGar magazines for the Keltec P-11.
Verified purchase: Yes | Condition: New
Shocked at poor quality. Follower was not properly aligned so loading ammo was a problem. Magazine would not fit in my P11. It hit the frame. Never used it. Talked to dealers that specialize in magazine sales at gun shows and they all agreed ProMag's are "iffy" products. They work or they don't. Quality was the biggest issue. I will never buy one of their products.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Firearm Magazines
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Firearm Magazines