For use with a caulking gun. If you only use a small amount of the sealant and there's a lot left in the tube when you're finished, remove the screw on tip and clean it out before covering the end of the tube with a piece of doubled over kitchen plastic wrap before screwing the CLEANED OUT TIP back onto the tube to hold the plastic wrap in place and keep the sealant fresh and from setting up on you.
Verified purchase: Yes | Condition: New
Used to make form in place smoker door gaskets Two doors. When applied plastic push tubes in sealant tube leaked sealant all over caulking gun. After 48 hr cure time opened doors to find some sealant not yet cured. No gaps before sealant over 1/4 in. thick. Have made form in place gaskets doing aircraft work, never a problem with quality materials. Really disappointed.
Verified purchase: Yes | Condition: New
I purchased this as a smoker gasket adhesive as recommended but found that the high temp rating is only 500 deg F. This is not high enough for the fire box. Read the fine print before ordering.
Verified purchase: Yes | Condition: New
It works great
Verified purchase: Yes | Condition: New
Shock, fill 5gl buckets with water, turn upside down and watch leak. Food grade silicone bead is best seal.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Caulks & Sealants
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Caulks & Sealants