I needed to replace the driver's side seat cover on my 2007 F250. I ordered the cover and upon arrival, checked for quality and color match. Both were perfect, so I proceeded with the replacement. I found some helpful videos showing the detailed steps, which may not be something everyone is ready to tackle themselves. It took me about two hours to remove, disassemble, and replace the cover. It is definitely not a simple task and requires some skill. I'd say it is a 4 on a 1-5 scale with 1 being easy and 5 being difficult. If you are unsure about doing it yourself, find an upholsterer who is willing to do it for you and expect to pay for 1-2 hours labor depending on how complex your seat is. Mine is a power seat with heaters and a mechanical lumbar adjustment. In the end, my seat looks brand new. I'm very happy with the product. Read full review
Verified purchase: Yes | Condition: New
The leather quality, color and stitching are top notch. The cut on the rear portion wasn’t right, requiring me to trim the foam in order to get full coverage. Also, the rear portion of these seat bottoms is actually made of carpet. The carpet on the oem cover matches the floor carpet. The new cover, although tan in color, has gray carpet on the back. Obviously, it sticks out. Overall, a good quality cover, not great.
Verified purchase: Yes | Condition: New
'96 4RUNNER Limited. This is very similar to the stock leather cushion upholstery. It fits perfect. The color match is extremely close. The leather is the same texture. But, these have twisted cardboard fiber cording that the Hog Rings pull against and the stock has stainless steel rods. I removed the cording and transplanted the Stainless Steel rods from the stock seat, quite easily. When I first opened the box, I was totally disappointed. It looked too grey in color, and didn't look like leather. I thought I had been "Had." But once I removed the seat and the lower cushion, I realized it was nearly identical. I'm very happy and satisfied with this cushion cover. Once installed, it looks like brand new from the Toyota factory. Besides using the stock Stainless Steel rods, I also reused the stock copper Hog Rings. I used extra long Needle Nose pliers and put inside the Hog Rings and stretched them open to remove the old cover. Then I used normal pliers to close them to install the new cover. These covers are great. They look like brand new Toyota Factory leather seats. These are the ones you want.Read full review
Verified purchase: Yes | Condition: New
17 year old car and the leather matched the original...how DO they do it?? The seat bottom LOOKS BRAND NEW! << Gorgeous >> It fit the old seat cushion. It just ended up being an absolute learning experience for my husband and me to remove the old and install the new! That’s on us. Found a great YouTube video that was supposed to be the same year but there were some slight differences here and there. We made it work. It saved us close to $200 by doing it ourselves instead of an upholsterer fixing a ratty old seat’s stitching (it could never have looked this good). Also, shipping was quick, as promised.
Verified purchase: Yes | Condition: New
I'm very pleased! The leather is very high quality and the colors look just like the original OEM. The fit is perfect and wasn't all that hard to do if you watch the video. For only $125.00 it's well worth it. I made an excellent choice.
Verified purchase: Yes | Condition: New
Excellent construction- easy to install. NO NEED for extra hardware, hog rings or tools (except to get the seat off). Cover installs the same as the original- took me about 30 minutes from start to finish including seat removal. I have not one negative thing to say about this product.
Verified purchase: Yes | Condition: New
It fit perfect on my 1999 Toyota 4Runner! The only thing that I think would have made it even better was adding a strap or anything towards the rear part of the cover to be able to secure it to the seat. It only have that on three sides and not the back area. I had to improvised, putting a piece of wire inside the leather and in between stitching to be able to secure it and tighten the back of the cover to the metal base of the seat. Other than that, it look amazing, just like the cover that came with the vehicle, if not better. Thank you!
Verified purchase: Yes | Condition: New
Decent quality. Product would be better it they included 10 hog rings with it, and also install insteuctions. It was a hassel finding those. I found a You Tube install video and hog rings, but I udthang the rings and a link would be an easy add on and huge enhancement.
Verified purchase: Yes | Condition: New
Very nice product made just like the original. It takes several hours to install. Be sure to have hog rings and hog ring pliers. There are some good step by step videos on YouTube that will save you some time. The color was dead on my original seat. I'm very pleased to have a good looking and comfortable seat again.
Verified purchase: Yes | Condition: New
I wasn’t quite sure what to expect, being this item is vinyl, but it fits great, feels great and was a great buy. You see the pattern? Great product! I would highly recommend. The one knock, there were no pre-cut holes for the controls on the drivers side, but that’s as not a big deal, I just cut an X and everything worked out!
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Seat Covers
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Seat Covers