The product is good quality; heavy duty; however the mounting is not as easy as described. The utv has to be in the air, and it is best to use a bottle to raise the mount and hold in place. Instructions are not all that clean, and more drilling and a spacer needs to be built between the front two holes on the forward flange since there turns out to be a 3/4" gap between the mount and the frame. All four holes need to be drilled through the mount/frame to get the four bolts through. Sort of difficult to do it all, but finally got it together. At least I didn't have to modify the mount, and the plow tangs hooked up correctly. They give you some extra 3/8" bolts which is good because spacing varies. Okay product, but instructions are not complete and it is more of a simple job than one would expect.