Picture 1 of 3
Picture 1 of 3
3 Gallon Vacuum Chamber Degassing Silicone & 3cfm Single Stage Pump Air AC Kit
EconoSuperStore (238351)
97.3% positive feedback
Price:
$189.99
Returns:
30 days returns. Buyer pays for return shipping. If you use an eBay shipping label, it will be deducted from your refund amount.
Condition:
Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins. Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone.
- Buy It Now3 Gallon Vacuum Chamber and 2.5CFM Single Stage Pump to Degassing Silicone Kit
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandGoplus
MPNET1197
GTIN0401004341135
UPC0401004341135
eBay Product ID (ePID)20005557402
Product Key Features
Pump Maximum Flow Rate3 cfm
Dimensions
Weight19.8 lb
All listings for this product
Ratings and Reviews
Most relevant reviews
- Oct 27, 2020Top favorable review
Good system. Looks cheap, but works very well
I've had this thing for two weeks now and I've been running it for different projects sometimes up to 24hrs straight and its been working great. It does heat up a little bit like you would expect it to after a while. I'm thinking that I might put a water cooled system on the outside of it to keep it at lower running temperatures when it's pulling an all-nighter. Showed up in good packaging. Unfortunately all the oil that was in it when it was shipped had leaked out. If you're buying this product, you need to remember to buy some vacuum pump oil. You're going to need some. Judging by what had spilled out, it was going to need some more anyways. I'm considering buying another one just because these vacuum pumps are so darn handy. Will purchase againVerified purchase: YesCondition: New
- Aug 20, 2020Top critical review
good value for the money but check the oil
There are no assembly directions included. I made the mistake of running the pump after looking at the oil sight glass and it had a low but operable level of oil. Nope it was false there was no oil and I blew the pump. The pump has instructions to use HFV 32 oil. That is a "chinese" spec. It uses regular ole vacuum pump oil. ISO32 Hope this helps you.Verified purchase: YesCondition: New
- Aug 12, 2020
Safety Concern - Poor Lid Design - Potential for Implosion
The pot and the vacuum pump, hose, and fittings are all solid. I had difficulty locating the necessary vacuum pump oil before use. It would have been much better if the kit included a pint of vacuum pump oil. The Acrylic (Plexiglass) lid is not suitable for this device. I was very careful to inspect the plumbing mounting hole in the lid for any kind of fractures before assembly - there were none, the hole looked very good and clean. Upon first use, after about 15 minutes under full vacuum cracks began to develop emanating from the hole culminating in an implosion at about 30 minutes in (photo included). The violent implosion not only destroyed the lid but also damaged the vacuum gauge and knocked the pump off of the table. At a minimum the lid should have been made from Polycarbonate or even better yet glass. The 1/2 inch thickness of the lid is inadequate for Acrylic and may even be marginal for Polycarbonate or glass. After acquiring a new Polycarbonate lid, a new vacuum gauge and a step drill I made modifications to mount the plumbing through the stainless steel pot (instead of compromising the integrity of the lid by drilling a hole in it), the unit functioned as expected. Instead of being the turn-key solution that was anticipated, turning this into something usable turned out to be an expensive and frustrating endeavor.
Verified purchase: YesCondition: New
- Dec 07, 2016
Not bad for the money
The plastic on the pump unit is cheap plastic, also the pump is VERY leaky. Also the silicone top has a hard time sealing and it takes some getting used to when trying to create a seal with the vacuum pump. But once you get the hang of it it works well and holds a good seal. I allow the vacuum to seal and took it down to -30 and it held that vacuum all night with no drop. Would like to see a heavier bottom pot for a more even heating. For the money it is a great setup.Verified purchase: YesCondition: New
- Oct 27, 2020
Decent vacuum for the price
Great little vac pot and pump for the price. Quality of seal and the lid is a bit sketchy but it's doing the job fine. Just be safe and cautious around it.Verified purchase: YesCondition: New
- Nov 07, 2017
Vacuum pot
Unit works great right out of the box. Easy to assemble took 10 mins and I was using it. Pump is very quite great value.Verified purchase: YesCondition: New
- Dec 06, 2016
Excellent quality
I'm new at this level of resin casting and this is my first vacuum setup for degassing silicone. But I am very impressed with the quality of this product - heavy aluminum tank, put together very nicely, a 3/4" thick acrylic top, the pump looks great. My three-gallon unit should do all I need as an amateur sculptor/resin caster. The cost was very reasonable.Verified purchase: YesCondition: New
- Oct 27, 2020
Quick to get a vacuum, but doesn't hold it.
It seals and create a vacuum quickly. The problem I have is, it won't hold the vacuum. I have tightened the gauge until I'm afraid I might crack the top cover. I'm not sure what else to do.Verified purchase: YesCondition: New
- Dec 13, 2017
Contained all pieces!
Arrived clean and we'll packaged,...all pieces there! Haven't used yet, but look forward to it!!Verified purchase: YesCondition: New
- Mar 12, 2019
Great product
Great productVerified purchase: YesCondition: New
