My Jura stopped making coffee and I thought it was the beans that we were using, clogging it up. It turns out that the regulator went bad & the water pressure wasn't high enough. Great fix!
Verified purchase: Yes | Condition: New
I read on other rivers that their purchase included the o-rings to replace so I bought this expecting those to be a part of the purchase too. They weren’t, so I have to go to the hardware store to get replacements. Also, the threading on the new part isn’t exactly like what it’s replacing. When tightened all the way, the regulator is upside down. I have made it work, but it isn’t what I was expecting.
Verified purchase: Yes | Condition: New
We have been enjoying our Jura for years. When the brew process slowed for each cup, we were worried. After reviewing several Jura repair videos online pointing to the membrane regulator as the likely cause, I decided to take the chance and replace the part. It wasn't a difficult repair and the part was reasonably priced. Now the Jura is again making coffee the way it should.
Verified purchase: Yes | Condition: New
Works well in Jura Impressa S8. Threads slipped when almost tight but used teflon tape and although not tight, does not leak at pump. Regulator and valve cured leaky Jura. Thanks for the quick shipment
Verified purchase: Yes | Condition: New
The threads are off. The OEM will screw tight and the fittings will be pointed in the right direction. The one I ordered is exactly 180 degrees opposite. So out comes the plumbers tape and prayers. It is a bit frustrating that this simple part can't me mfg correctly.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Coffee, Tea & Espresso Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Coffee, Tea & Espresso Parts