๐งฐSlight Modding May Be Needed โ Light sanding or filing may be required depending on your gearshift tolerances. Fix your F-150โs shifter the smart way! Until now. 1 order includes both versions of the detent .
Was a great fit! There isnโt the metal roller on this but I donโt see that being an issue. I put a little lithium grease on the top of the gear hump track and it slides nicely. Tough to get on if you canโt get your shifter knob off. Def not the fault of the detent. Small trick if you canโt - use a small zip tie to pull the spring down towards the โroller endโ and zip it tight. It installs roughly at 12 oโclock and then turns counter clockwise to 9. Then just seat the spring clip and cut the zip tie. Worked like a charm bc I could not get the shifter know off for clearance. Very good fix! Saved me $600 from buying a new shifter assembly bc Ford does not sell the detent as a separate part. Also a great time to switch the cable bushing - get the Dorman 14057. Mine is a 2010 F150 FX4. Thank you!! - great job!!