 |
Was a quick shipment. Very easy to install and just as good as factory ones at half the price. Only problem I had was I had to clean threads for blade bolts.
Verified purchase: Yes | Condition: Pre-owned
The bolt hole in the spindle for the blade attachment bolt was too small to accept the standard 7/16' X 14 bolt. I had to use a round file to open the hole which appeared to have been hit with a hammer. This was most likely done to avoid using a press to set the spindle in the housing bearings, This was done by a caveman, not a mechanic. I did get the assembly installed on my deck and expect it to work. I have kept a note to myself that future mower parts cannot come from Floyd's because either they don't have a press or just refuse to use it!
Verified purchase: Yes | Condition: Pre-owned
I bought two of these and they work just fine but the bolt holes for the blades are two different depths and the threads were so dirty that I actually filled them with gun cleaning solvent and used one of the barrel cleaning brushes attached to my drill to clean them out good. I would have thought that for the price I paid for rebuilt spindles, this would have already been taken care of and I wouldn't have had to buy a shorter bolt for the one spindle. Just sayin.
Verified purchase: Yes | Condition: Pre-owned
wrong depth bolt hole made for lots of extra work vender knew about short bolt hole but said nothing after call and 4 wasted hours work vender sent me a used shorter (used and polished) bolt not a good deal
Verified purchase: Yes | Condition: Pre-owned
floyd's never fails to deliver. good paint, put hubs in my mini lathe to spin em & no noise and no wobble on blade hub. gr8 price vs value. saved me hours of hammering on my old hubs...
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Lawn Mower Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Lawn Mower Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
