 |
Plug and play! Works perfectly in my Dell R710. Some notes on getting it to work: -I needed a cable that my server didn't come with. The cable I found originally in my server had some sort of card edge connector, whereas the cable you need has the same connector as on the drive backplane. The cable I got to get it working was listed as "H700 SAS-A SAS-B SATA Cable for Dell POWEREDGE" -You cannot plug this into the storage PCI slot! Plug it into a regular PCI 8X slot.
Verified purchase: Yes | Condition: New
No complaints. I upgraded it to the newest firmware from Avago and run a 6-drive RAID 0 array with 128 GB SSDs. Pegs 2.1 GB/s with ease. :)
Verified purchase: Yes | Condition: Pre-owned
Works out of the box. I have it running in a Dell 710 on a Proxmox single bootable disk and rest of the disks and SSD cache in ZFS pool. You do have to modify the controller to select a bootable disk if booting off the controller. Card does not run hot inside this server. I am assuming because unlike white box built servers this server is designed with high efficient air flow across the entire server front to rear.
Verified purchase: Yes | Condition: Pre-owned
Works great. Used the instructions to flash into IT mode on forums[dot]servethehome[dot]com/index.php?threads/dell-h200-flash-to-it-firmware-procedure-for-dell-servers.467/ , so I can run JBOD. Also found out and verified it works in several other R and T servers.
Verified purchase: Yes | Condition: Pre-owned
Great card for FreeNAS. Had some problems with BIOS flashing, it was very picky on the motherboards, so I tried different ones and finally got it working on my very old Dell mobo. Runs good in Dell R510 storage slot without any problem.
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Disk Controllers/RAID Cards
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Disk Controllers/RAID Cards
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
