Overall the product is very good, it locks up tight in the press. The only hassle I had was adjusting the seating die for the overall length, once it was set it repeated every time.
Verified purchase: Yes | Condition: New
When I first got this kit and tried it out I loved it, but now....not so much. After resizing around 100 cases for 300 Blackout. I noticed that the die was lifting in my press every time I brought the ram up to resize a case. Open investigation I found the threaded adapter was crumbling at the bottom of the locking lugs. It appears that Hornady chose to use the wrong metal for this part. It appears to be cast zinc or some sort of powdered metal. This is totally the wrong material for the bushing! With this bushing being made as it is, this kit is useless there is no consistency in case length and improper head spacing! I had to remove all the adapters and go through and resize every case I did with the kit. Do not waste your money!
Verified purchase: Yes | Condition: New
This is th primary set with th 1 1/2"x12 thread bushing for ur press, and 3:lugged qwick change die sleeve bushings, all stainless steel, authentic Hornady products, and if u happen to own a Buchanan hand press as well as an RCBS Ammo Master press as I do then this this set becomes a nessesity along with as many 10pks. of Hornady Lock-N-Load lugged die sleeve bushings as one can afford. Needless to say, it starts with this set. I personally recommend them to all reloaders everywhere. Michael "Mad Dog" Jones.
Verified purchase: Yes | Condition: New
I was expecting machine cut steel for the conversion bushing. This seems to be made of some sort of pot metal. So far works great and it is really handy for the RCBS RC II. Haven't loaded any precision rifle rounds with it yet so can't verify its consistency. Now if only the Redding 7 or Lyman 8 turret presses were threaded to 1.25x12 then this would really be handy. All in all 4 piece kit was $15 and extra die sleeves are cheap online.
Verified purchase: Yes | Condition: New
Works great lets you set your dies and switch back and forth to whatever your doing. The conversion bushing gets a little sloppy after a lot of use, that's why I order the set to keep an extra handy. I was doing some extreme bullet sizing which probably didn't help anything.
Verified purchase: Yes | Condition: New
Really like the way multiple die changes take place and not loose base settings. Had no issues at all with the locking lugs jamming or binding up or even stripping out So far , So good
Verified purchase: Yes | Condition: New
Great to have more convenience to use a single stage press!
Verified purchase: Yes | Condition: New
Ease of changing dies, bought extra bushings so as to maintain settings and just install, and your on your way to loading in a space of minutes..
Verified purchase: Yes | Condition: New
Awesome product. A must have for any single stage press that will accept them. It makes die changes on my rcbs summit a breeze no die adjusting every time you swap.
Verified purchase: Yes | Condition: New
I have a friend who was having trouble with some of his dies. These makes it easier and faster to change them out. He loves them and uses them all the time.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Presses & Accessories
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Presses & Accessories